How do I check the condition of a grain storage site’s bins and aeration fans?
Walk around each bin, and go inside only when it is empty, its fans and augers are locked out and someone stays outside, looking at walls, roof, floor, doors and anchoring, then run the aeration fans and listen for strain. Ask for repair and inspection records for every bin, and hire an independent inspector for anything that looks doubtful.
Begin with the bins. Outside, look for rust, dents, loose bolts, cracked foundations and water pooling near the base. Inside, and only in an empty bin with its fans and augers locked out and someone watching from outside, check the walls and roof for corrosion, damage or light coming through. Ask whether any bin has been repaired, modified or moved, and what was done each time. Keep a list by bin number.
Then the aeration. Run each fan and watch for vibration, noise, poor airflow or motors that run hot. Check ducts and floors for blockage or damage, and see whether the controls work. Ask how often fans are serviced and which ones have been replaced. A fan that is quiet but moves little air is a problem too.
Finally, connect the physical condition to the books. Ask for the bin repair history, the stock on hand at various times of year, and what the site spent on upkeep. Your accountant can read these alongside the inventory figures. Hire your own inspector for structural questions, and have your lawyer confirm in the written agreement exactly which bins and fans are included. Photograph each bin and fan as you go, and keep the notes in one folder, so the condition you saw can be compared with what the written agreement describes.
Key takeaways
- Inspect each bin outside, and inside only when it is empty and safe to enter, and keep notes by bin number.
- Run every aeration fan and compare airflow, noise and vibration between them.
- Hire an independent inspector for structural doubts, and list included bins in the agreement.
Related reading
12 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I judge the condition of a small engine shop’s parts bins and shelving?
- Expert answerHow do I judge the condition of a rug store’s storage racks and rolled stock?
- Expert answerWhat are good storage conditions for fabrics at a costume rental shop?
- Expert answerHow do I inspect a Chinese takeout kitchen’s wok range and exhaust fan?
- Expert answerHow do I check the condition of a ranch’s hay equipment and haying schedule?
- Expert answerHow do I review a vineyard’s trellis and irrigation system condition?
Buying
- Expert answerHow do I check a grain farm’s bin storage and drying equipment before buying?
- Expert answerWhat should I look for in a storage warehouse’s wooden vault condition?
- Expert answerHow do I check a fish farm’s tanks, aeration and water quality records?
- Expert answerHow do I assess a hydroponic farm’s backup power for pumps and fans?
- Expert answerHow do I find out where a beekeeper’s outyards sit and who hosts them?
- Expert answerWhat should I look at in a feed store’s bulk storage bins and bagging setup?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.