How do I check the freight scanning equipment at a cross-dock operation?
Test it in use. Follow a few pallets from inbound scan to outbound scan and see whether each handoff is captured, whether the devices are quick and whether the readings match the freight. Ask about the age of the devices, spare units, repair history and what happens during an outage.
Start with coverage. Does every step get a scan, or only some? Look for gaps where freight moves without being scanned, such as a quick door change or a staging move. Gaps mean the records may not describe what actually happened.
Next, test accuracy. Pick several pallets and compare the system’s location and status with where they physically are. Ask how scan errors are corrected and how often. Watch for workers who skip the scan to save time, which can mean the devices or the process are slow.
Then look at the hardware. How old are the handheld units, and how many are spare? Are batteries and chargers in good shape? Ask what happens when the network drops or a device fails during a rush. A fallback on paper is better than none. Finally, ask your accountant how the equipment is carried in the books and what replacement might cost. If financing is in place, ask your lawyer to review it. List each piece of equipment and have your lawyer review the list. Ask whether the software that reads the scans is supported and updated, since old software can strand good hardware.
Key takeaways
- Follow pallets from inbound to outbound scan and look for gaps.
- Compare system locations with real positions.
- Ask about spare units, outages and the fallback process.
- Ask whether the scan software is still supported and updated.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerWhat should I look at in a warehouse’s dock doors and loading dock equipment?
- Expert answerWhat calibration records should a surveying firm keep for its drone and scanning equipment?
- Expert answerHow do I check a document scanning service’s backlog of client boxes?
- Expert answerHow do I check how a freight brokerage vets its carriers?
- Expert answerHow do I find out how many of a freight brokerage’s shippers use it for every load?
- Expert answerWhat should I ask about freight delivery of treadmills when buying a fitness store?
Due diligence
- Expert answerHow can I tell if a freight broker’s carrier list is real or just names on a spreadsheet?
- Expert answerHow do I check a freight brokerage’s dispatcher turnover before buying?
- Expert answerHow do I check a freight desk’s margin by lane before buying?
- Expert answerHow do I check a freight desk’s track and trace updates to shippers?
- Expert answerWhat should I ask about a freight brokerage’s cash flow when carriers want quick pay?
- Expert answerWhat should I ask about a freight brokerage’s transportation management software?
- Expert answerWhat should I ask about a harbour tour boat’s dock, loading ramp and gangway?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.