How do I check the hoses, reels and fittings on a mobile fleet washing rig?
Run the rig and watch it work. Look along each hose for cracks, bulges, kinks and patched sections, and check that the reels wind smoothly and hold. Look at the fittings and couplings for leaks, corrosion and mismatched parts. Then ask what spares are carried and when each part was last replaced.
Start with a full run. Ask the seller to set up the rig as for a normal job, then roll out and retract each hose. Listen for hesitation in the reels and look for drips at joints. Check the pressure behaviour of the pump and gun, and note any part that has been taped, clamped or adapted. A rig full of workarounds will cost more to keep running.
Next, check the spares and the routine. Ask what spare hoses, fittings, nozzles and seals travel with the rig, where they are kept and how they are restocked. Ask how often hoses are replaced and whether the operator checks them at the start of each day. A short written checklist is a good sign, even if the operator follows it informally.
Finally, look at the records. Ask for parts and repair spending by year, shown as totals, and for the age of the major components. Ask your accountant how the rig is carried in the books. If it is financed or leased, have your lawyer review the agreement. Compare the condition with what you would need for your own jobs, and list what you would replace first.
Key takeaways
- Run the rig and inspect every hose, reel and fitting for wear, leaks and patches.
- Ask what spares are carried and how often parts are replaced.
- Total yearly parts and repair spending, and have your lawyer review any lease or financing.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a mobile welding rig and the work it brings in?
- Expert answerWhat should I look at in an insulation company’s spray foam rig and heated hoses?
- Expert answerHow do I judge a carpet cleaner’s van, hoses and generator wear?
- Expert answerHow do I judge a videographer’s sample reels against the work actually delivered?
Due diligence
- Expert answerWhat should I look at in a tackle shop’s slow-moving rod and reel inventory?
- Expert answerWhat should I ask about a functional fitness box’s barbell and rig inventory?
- Expert answerHow do I check a bridal shop’s fitting appointment calendar for no-shows?
- Expert answerHow do I check how much tile, fittings and filter wrap a drainage contractor keeps in stock?
- Expert answerHow do I check a maple equipment dealer’s stock of tubing, spouts and fittings?
- Expert answerHow do I judge a lingerie boutique’s maternity and specialty fitting clients?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.