How do I check a pressure washing company’s water tank and trailer setup?
Inspect the tank for cracks and leaks, the plumbing and pump mounts for wear, and the trailer frame, tires, lights and hitch. Then see the rig loaded and running, since a setup that looks tidy empty can behave very differently when it is full of water.
A mobile pressure washing rig is a tank, a pump, hoses and a trailer working together. Begin with the tank: look for cracks, stress marks around fittings and any signs of old repairs. Fill it if the seller allows, and watch for weeping at the outlets. Notice how the load sits, because a sloshing tank makes a trailer harder to handle.
Next, look at the trailer itself. Walk the frame for rust, bent sections and weld cracks. Check the axle, tires, brakes, lights, jack and hitch. Ask who services the trailer and how often. Ride along on a short drive, if the seller will allow it, and notice how it tows when full and when empty. Ask what the whole rig weighs when loaded and whether the tow vehicle handles it comfortably.
Ask how the rig is stored through cold weather, since frozen plumbing is a common cause of damage. Look at how the pump and hoses are mounted and secured. Confirm whether the trailer is part of the sale and how its ownership papers are handled; your lawyer should check that. Ask whether any part was custom built, and by whom.
Key takeaways
- Fill the tank and watch for weeping fittings, then look closely at the frame, axle and hitch.
- See the rig towed loaded if you can, and ask how it is stored in cold weather.
- Have a lawyer confirm the trailer is included and its paperwork is in order.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerWhat do before-and-after photo libraries add to a pressure washing company’s sale?
- Expert answerHow do I check an event lighting company’s power cabling and dimmer gear?
- Expert answerWhat should I check on a food truck’s water and waste tanks?
- Expert answerHow do I check what a reptile store’s electricity costs say about its tank setups?
- Expert answerHow do I read a septic company’s customer file of tank locations and lid depths?
- Expert answerHow do I check a commercial laundry’s water, gas and boiler setup?
- Expert answerHow do I check a shed company’s delivery truck and tilt-bed trailer condition?
- Expert answerHow do I find out if a pressure washing company’s results hold up after a few months?
Buying
- Expert answerHow do I find out how weather swings affect a pressure washing company’s calendar?
- Expert answerWhat should I ask about a glamping site’s off-grid power and water supply?
- Expert answerHow do I check an industrial cleaning company’s vacuum trucks and pressure washers?
- Expert answerHow do I assess a mobile detailing business’s generator and water tank equipment?
- Expert answerHow do I check a fish farm’s tanks, aeration and water quality records?
- Expert answerHow do I inspect a mobile grooming van’s generator, water tank and heater?
- Expert answerWhat should I know about a pressure washer’s surface cleaner and nozzle inventory?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
- 03Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.