How do I check a truck and trailer parking yard’s gravel base and turning radius?
Walk the yard after heavy rain and look for ruts, soft spots, pooling water and bare patches, then ask what was laid and when it was last regraded. Test turning room by watching a loaded rig enter, turn and park, or by bringing a driver you trust to try it.
Surface condition shows itself after weather. Visit after heavy rain or a thaw and look at the gate approach, the main lanes and the corners. Ruts, soft ground and standing water all point to drainage or base problems.
Ask what the base is made of, how deep it was laid and when it was last graded or topped up. Ask what that work cost and whether another round is due soon. Your accountant can fold that into your plan.
For turning room, watch the real thing. A driver with a full-length trailer can tell you in minutes whether the lanes are easy or tight. Check the gate width, the corner clearances and whether rigs back up onto the road at busy times. Look at the layout of stalls against the lanes, and at the edges where fences or ditches limit movement. Ask your lawyer to review any boundary, access or easement documents that affect how the yard is used. Ask also about winter, when frost lifts a gravel surface and spring thaw softens it. Look at how the seller keeps the gate area and the main lane free of potholes, and what equipment they use for that. Ask for photos from past seasons, and for the cost of the last surface work, so you can plan.
Key takeaways
- Visit after heavy rain and look at lanes and corners.
- Ask what the base is, how deep and when it was last graded.
- Have a driver test the turning room with a full trailer.
- Ask your lawyer to review access and boundary documents.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerWhat should I check about a trucking company’s yard, shop and parking space?
- Expert answerHow do I judge a lumber yard’s forklifts, boom trucks and racking?
- Expert answerWhat should I check about the bays and yard before buying a heavy truck repair shop?
- Expert answerHow do I check a landscape supply yard’s gravel, soil and mulch stock counts?
- Expert answerHow do I check a scrap yard’s supplier base of contractors and walk-in sellers?
- Expert answerHow do I check a hauling company’s gravel, sand and aggregate pickup arrangements?
- Expert answerHow do I judge a concierge service’s seniors and busy-family customer base?
- Expert answerWhat should I ask about a handyman company’s minimum job size and travel radius?
Due diligence
- Expert answerHow do I assess a horse and livestock trailer dealer’s buyer base?
- Expert answerHow do I check a scrap yard’s truck and roll-off bin fleet?
- Expert answerWhat should I ask about a supply yard’s loaders and delivery trucks?
- Expert answerWhat should I look at in a trailer lot’s gravel surface, lighting and fencing?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.