How do I inspect the camera sensors and GPS receivers at an aerial mapping firm?
List each camera sensor and GPS receiver with its age, serial number and use history. Look for scratches, dust and loose mounts, ask for recent calibration and test results, and check sample outputs against surveyed points to see whether any unit has drifted.
Start with a physical check of each sensor and receiver. Look at lenses for scratches or haze, mounts for play, connectors for wear and housings for impact marks. Ask how units are stored and transported, since careless handling shows up in the data before it shows on the case.
Then ask for the test record. Most firms compare their results against known points from time to time. Ask when each unit was last tested, what the test showed, and what was done about any drift. Request a sample dataset with client names and details removed, and ask your own technical adviser to look at it. If the firm has no test record, plan for what it would cost to build one.
Check the use history: which units fly most, which are rarely used, and which have had repairs. Ask about spare sensors and receivers, and what would happen to a job if one failed in the field. Ask your accountant how the gear is carried in the books, and have your lawyer review any lease or financing agreement on it. Ask how long a sensor stays in service before replacement.
Key takeaways
- Inspect lenses, mounts and connectors on every unit.
- Ask when each was last tested and what was done about drift.
- Find out how many spares exist and what a field failure would cost.
- Check sample outputs against surveyed points for drift.
Related reading
14 pages on the same subject, grouped by topic.
Selling
Buying
- Expert answerDo I need to inspect a research firm’s survey platform subscriptions before buying?
- Expert answerHow do I check a survey firm’s respondent panel quality before buying?
- Expert answerWhat should I ask about a surveying firm’s survey markers, stakes and field supplies?
- Expert answerWhat calibration records should a surveying firm keep for its drone and scanning equipment?
- Expert answerDo I need to inspect a commercial cleaning firm’s floor machines before taking over?
- Expert answerHow do I judge a grading company’s laser level and GPS machine control gear?
- Expert answerWhat should I ask about the mapping tools behind a route-planning business?
Due diligence
- Expert answerHow do I check a camera rental shop’s drone and gimbal inventory?
- Expert answerHow do I assess a mapping firm’s mix of analysts and developers?
- Expert answerHow many software seats does a mapping firm need, and how do I check usage?
- Expert answerHow do I check a camera rental house’s lens inventory and sensor cleaning records?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.