How do I judge the condition of a welding shop’s MIG and TIG machines?
Look at each welder as a tool you will run every day. Check the cables, torches, feeders and regulators, listen for an unstable arc, and compare the age on the data plate with the repair history. Several newer machines with clean leads say more than one polished unit at the front.
Begin with a list of every welding machine: type, make, year from the data plate and where it sits. Mark which units are in daily use and which sit idle. Idle machines may be spares, or may be broken, so ask which.
Examine the wearing parts. On MIG units, look at the wire feeder rollers, liner and drive; on TIG units, look at torches, foot pedals and gas lines. Cracked cable insulation, loose lugs and scorched connectors suggest neglect. Strike an arc on each unit and watch for spatter, wandering output or a fan that struggles.
Ask about repair and calibration records, and who services the machines. Look at the supply side too: gas cylinders, regulators and the supplier arrangements behind them. Note whether newer inverter machines sit beside older transformer units, and ask whether parts and service are still available for each. Ask a welding supplier or technician to review the units with you. Note each unit’s location on a simple floor sketch, so your findings can be matched to the list afterwards. List the equipment the business uses, noting which is owned and which is leased, and have your lawyer review the paperwork behind it.
Key takeaways
- List every unit with its data plate details and mark which are used daily.
- Strike an arc on each machine and examine cables, torches and feeders.
- Ask whether parts and service are still available for older units.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge the condition of a copy shop’s self-serve machines?
- Expert answerHow do I judge a machine shop’s mix of manual lathes and CNC machines?
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- Expert answerHow do I judge the sewing machines and pressing gear in a tailor shop?
- Expert answerHow do I judge a butcher shop’s saw, grinder and slicer condition?
- Expert answerHow do I judge a butcher shop’s walk-in cooler and meat saw condition?
- Expert answerHow do I judge the condition of a comic shop’s long boxes before buying it?
- Expert answerHow do I judge an ice cream shop’s batch freezer and display case condition?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.