How do I judge a foundry’s fettling and finishing capacity?
Watch what happens to castings after they leave the mould. Fettling and finishing often become the bottleneck, so count the people, stations and tools, see how much work waits on the floor, and ask how long a typical casting takes to reach the shipping door.
Walk the area behind the pour. Look at how many castings are waiting, how they are stacked and how far they must travel between stations. A pile of unfinished work is a sign that the pour runs ahead of the finishing. Ask how long a typical job sits there and whether customers have complained about late delivery.
Look at the equipment and the people. Grinders, saws, blast cabinets and benches wear out, and the work is physically hard. Ask how many skilled finishers the shop has, how long they have been there, and what happens when one is away. Ask about hand tool replacement and who sharpens or rebuilds the heavier machines.
Ask what the foundry would do with extra orders. Could it add a shift, hire more finishers or send work to another shop? Ask whether any castings are already outsourced for finishing, and who does that work. Your accountant can help you see how labour in this area is reflected in costs. If you plan growth, ask which stage, finishing or another part of the shop, would limit output first. Ask the finishers which castings give the most trouble and why, since they know where time disappears.
Key takeaways
- Look at how much work waits after the pour and where it piles up.
- Ask how many skilled finishers there are and what happens if one leaves.
- Ask which finishing work is already sent to outside shops.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge the polishing, finishing and sanding equipment in a shoe repair shop?
- Expert answerHow do I judge the age and capacity of a coffee roaster’s drum roaster?
- Expert answerHow do I judge an Etsy shop’s handmade production capacity before buying?
- Expert answerHow do I judge an ice cream shop’s line-up and patio capacity on hot days?
- Expert answerWhat should I look at in a cabinet shop’s spray finishing room and ventilation?
- Expert answerWhat should I check about a machine shop’s compressed air and electrical capacity before buying?
- Expert answerHow do I judge a pasta maker’s drying racks and cold storage capacity?
Due diligence
- Expert answerWhat should I ask about a cabinet shop’s dust collection and finishing booth upkeep?
- Expert answerHow do I check a food co-packer’s cold storage and receiving dock capacity?
- Expert answerWhat should I ask about a concrete contractor’s stamped and decorative finishing skills?
- Expert answerWhat should I look for in a cobbler’s stitching and finishing machines?
- Expert answerHow do I check a pizzeria’s walk-in cooler and prep fridge capacity?
- Expert answerHow do I check the road access and septic capacity at a farm wedding venue?
- Expert answerHow do I judge the finishing booth and spray setup at a guitar workshop?
- Expert answerHow do I judge a pallet recycler’s band resaw and dismantling output?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.