How do I judge a gutter company’s seamless roll-forming machine and truck setup?
Have the machine run in front of you and examine the gutters it produces for straight edges, clean cuts and consistent profile. Check the rollers, cutters, tooling and mounting in the truck, ask for service records and find out whether the machine and truck are owned outright. Ask a mechanic to look at the vehicle.
The roll former is the core asset of a seamless gutter business, and it lives inside a truck or trailer that has its own wear. Ask the owner for the make, age and service history of both. Find out whether the machine was bought new or used, whether the tooling has been replaced and who repaired it last.
Watch it work. Ask the owner to form a few lengths and look at the results: are the edges straight, are the profiles consistent, and are the cuts clean? Look at the rollers for scoring, the drive for slack, and the mounting and power supply for tidy work. Ask the crew whether they ever fight with the machine, and what they do when it jams.
Next, check the truck. Have a mechanic look at the chassis, suspension, brakes and any added racks or generators, since a heavy machine adds stress. Ask whether the truck or machine is financed or leased. If the machine has a profile you cannot service locally, ask where parts come from. Plan for downtime and for a backup if either asset fails mid-season, and ask your accountant to help you plan the cost.
Key takeaways
- Watch the machine form gutters and inspect the results for consistency.
- Check rollers, cutters, tooling and mounting, and ask about service and parts.
- Have a mechanic inspect the truck, and confirm who owns or finances each item.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I judge a locksmith van’s tool setup and on-board key machine?
- Expert answerHow do I judge an orchard’s frost protection and wind machine setup?
- Expert answerHow do I check a scrap yard’s truck and roll-off bin fleet?
- Expert answerWhat should I ask about a machine shop’s programming and setup staff?
Buying
- Expert answerHow do I judge a fleet shop’s mobile service truck setup?
- Expert answerHow do I judge a glass shop’s cutting table and tempering supplier setup?
- Expert answerHow do I judge the condition of a tree service’s chippers and bucket trucks?
- Expert answerWhat should I check about a food truck’s point-of-sale and online ordering setup?
- Expert answerWhat should I inspect on the generator and propane setup of a food truck?
- Expert answerWhat equipment should I check on a garage door company’s installation trucks?
- Expert answerWhat should I look at in a holiday lighting company’s bucket truck and ladder fleet?
- Expert answerHow do I judge a dog walking company’s pack-walk size limits and van setup?
- Expert answerHow do I judge a window installer’s truck, lift and glass-handling cart setup?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.