How do I judge the LED wall and video processing stock at an AV rental company?
Check the panels in batches, because mixed batches can show different colour and brightness side by side. Build a section of wall, look for dead pixels and failed modules, and test the processors and spares. Then ask how often the wall actually goes out.
Ask the owner to power up a section of wall that mixes older and newer panels. Look at colour match, brightness, dead pixels and any flicker, then at the frames, locks and connectors. A wall that looks fine as a single panel may not hold up when many of them sit together, so see it assembled if you can.
Next, look at the video processing and supporting kit: processors, scalers, cabling, power distribution and flight cases. Ask which pieces are single points of failure on a show and how many spares are held. Technology in this area ages quickly, so ask about the age of each batch and what the owner expects to replace soon.
Then look at demand. Ask for rental history by wall and by processor, plus how many shows needed a replacement mid-event. A big wall that rarely leaves the building is a heavier burden than a smaller one that is booked constantly. Ask your lawyer and accountant whether any of it is financed or leased. Ask how panels are cleaned, stored and transported, since careless handling shows up as damaged corners and failed connectors long before the picture itself looks wrong.
Key takeaways
- Build a mixed-batch section of wall and look for colour, brightness and dead-pixel issues.
- Check processors, spares and cases, and which parts are single points of failure.
- Use rental history to see how often each wall actually works.
Related reading
14 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I judge a ski rental shop’s boot-fitting wall and dryer racks?
- Expert answerHow do I check a car audio shop’s stock of wiring harnesses and dash adapters?
- Expert answerHow do I verify a video production company’s equipment ownership and rentals?
- Expert answerHow do I check a climbing gym’s rental shoe and harness stock?
- Expert answerHow do I check a linen rental company’s colour and fabric stock?
- Expert answerHow do I check a roller rink’s skate rental stock, wheels and bearings?
- Expert answerWhat should I check about a video production house’s cyclorama wall and green-screen room upkeep?
- Expert answerWhich outdoor LED screen failures should I ask a signage installer about?
Buying
- Expert answerHow do I judge a bike rental shop’s helmets, locks and accessory stock?
- Expert answerHow do I judge a sign shop’s LED module and power supply stock?
- Expert answerWhy does a video production company’s gear rental income matter to a buyer?
- Expert answerHow do I judge a car audio shop’s reputation with enthusiast customers?
- Expert answerWhat should I look at in a sign shop’s stock of aluminum, acrylic and LED modules?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.