How do I judge a sewing machine shop’s parts inventory for older models?
Sort the parts by whether real repair jobs use them. Old belts, motors and gears are mainly valuable if machines that need them still come in, or if the seller can show they sell to other repairers. Check condition, test fit where you can, and ask the seller how much of the stock is hard to find and how it was acquired.
Ask for a walk through the parts room with the seller, drawer by drawer. Note how parts are labelled and whether they match a model list. Unlabelled bags and mixed boxes slow every repair and make counting unreliable. Check the condition: rubber and plastic parts can crack or harden with age, and metal parts can rust in damp storage.
Then connect the stock to demand. Ask which older models still come in for repair and which parts they need most. Look at recent repair tickets to see whether the stock matches the work. Parts for models nobody services any more may be dead stock, unless the seller can show they still sell to other repairers or collectors. Parts that fix common machines still in use are the useful ones.
Finally, ask where the stock came from. Some of it may come from bought-out shops, estate lots, supplier clearances or machines stripped for parts. Ask whether the seller has records, and whether any parts are set aside for customers or on loan. Ask also whether the stock depends on a single parts source. Agree in writing, with your lawyer, how the parts will be counted and which are included in the sale.
Key takeaways
- Match the parts on hand to the models that actually come in for repair.
- Check condition and labelling, and look for aged rubber, plastic and rust.
- Ask how scarce parts were acquired and whether any are set aside for customers or on loan.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge the sewing machines and pressing gear in a tailor shop?
- Expert answerHow do I assess a radio-controlled hobby shop’s repair and parts business?
- Expert answerWhat should I ask about a trailer repair shop’s parts runner and supplier credit?
- Expert answerHow do I judge the polishing, finishing and sanding equipment in a shoe repair shop?
- Expert answerHow do I judge a skate shop’s repair and board assembly service?
- Expert answerHow do I judge a running store’s spring race season inventory timing?
Due diligence
- Expert answerHow do I check how much of a machine shop’s work is repeat parts versus one-off jobs?
- Expert answerHow do I check a machine shop’s inspection records and scrapped parts?
- Expert answerHow do I judge if a sewing school’s sewing machine servicing costs are creeping up?
- Expert answerHow do I check a machine shop’s tooling inventory and who owns the fixtures?
- Expert answerHow do I check a computer repair shop’s parts suppliers and return terms?
- Expert answerHow do I read an auto repair shop’s labour, parts and tire sales?
- Expert answerHow do I tell if a computer store is stuck with outdated laptop and parts inventory?
- Expert answerHow do I check the photography and model shoots behind a vintage clothing shop’s listings?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentWhat is inventory
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.