How do I judge the shop tools and bay layout of a van upfitting business?
Stand in the doorway and follow a van through the shop in your mind. Check that the bays are big enough, that tools sit near where they are used, and that power, air and lighting reach every station. Then inspect the tools themselves, one by one.
Start with flow. Where does a van enter, wait, get stripped, built out and finished? Look for bottlenecks: a narrow door, a bay too short for a long van, a spot where two jobs block each other. Ask how many vans can be worked on at once and what limits that number.
Then look at services. Check that compressed air, power outlets, lighting and ventilation reach each bay. Look at lifts, benches, racks and carts, and list the major tools, noting which are owned and which are leased, and have your lawyer review the paperwork behind them. Note which items are well kept and which look worn, and ask when each was last serviced. Ask your accountant how the tools are listed in the books.
Finally, consider storage and growth. Is there a clear place for panels, shelving parts and offcuts? Is the shop tidy enough that people can work well? Ask whether the layout would suit a larger operation and what would be needed to expand. A qualified tradesperson can inspect the major equipment, and your lawyer can review the lease for the shop and any equipment financing. A sketch of the floor plan with bays, benches and services marked will help you compare this shop with others later.
Key takeaways
- Trace a van’s path through the shop and note any bottleneck.
- Check power, air, lighting and ventilation at every bay.
- Note which major tools are owned or leased and when each was last serviced.
Related reading
13 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I judge a locksmith van’s tool setup and on-board key machine?
- Expert answerHow do I review an appliance repair technician’s service van stock and tools?
- Expert answerWhat should I check about a trades company’s vans and tools before buying?
- Expert answerHow do I judge a detailing studio’s bay lighting and layout for paint correction work?
- Expert answerHow do I check a rental yard’s shop tools, hoists and wash bay?
Buying
- Expert answerDoes a mobile grooming van’s interior layout limit what dogs a groomer can take?
- Expert answerHow do I assess a mobile windshield replacement van’s tools and adhesives?
- Expert answerWhat do an HVAC company’s van tool and stock checklists tell a buyer?
- Expert answerWhat should I look at in a handyman company’s work van tool racks and consumables?
- Expert answerWhich chimney sweep tools and liners in the van wear out fastest?
- Expert answerHow do I judge the condition of an airport shuttle’s vans and passenger seating?
- Expert answerHow do I judge when a van rental fleet should be replaced?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.