How do I judge a surf shop’s rack and storage setup for boards?
Look at how the boards are held, both on the floor and in the back. Check racks for strength and padding, the room for storing stock safely and any signs of dings, sun or moisture damage. Then ask how boards are counted, so you know what you are really inheriting.
Boards are long, light and easy to damage, so storage tells you a lot about how the shop is run. Walk the floor and the back room. Look at the racks: are they firmly fixed, padded and spaced so boards do not rub? Ask whether any have been repaired or replaced, and whether the shop owns the racks or they belong to a supplier.
Look closely at the stock. Check for dings, yellowing, delamination or warping, particularly on boards stored near windows, heat or damp. Ask how long damaged boards stay on the floor and what the shop does with them. Damaged stock held at full cost makes the inventory look better than it is.
Ask how boards are counted and tracked. Is there a stock sheet with model, size and cost, and does it match what you see? Ask how consigned or on-order boards are labelled, so they are not confused with owned stock. Finally, ask whether the space would suit a larger range, a repair corner or lessons, and what a change would involve. Your insurance broker can explain how the shop’s policy covers stock held in the building.
Key takeaways
- Inspect racks for strength and padding, and boards for dings, warping and sun damage.
- Compare the stock sheet with what is physically there, including consigned boards.
- Ask whether the space could handle changes without costly rebuilding.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerWhat should I ask about a kayak rental shop’s storage racks and winter boat care?
- Expert answerHow do I judge the racks and hooks inventory in a coating shop?
- Expert answerHow do I judge a bagel shop’s boiling kettle and deck oven setup?
- Expert answerHow do I judge a fleet shop’s mobile service truck setup?
- Expert answerHow do I judge a glass shop’s cutting table and tempering supplier setup?
- Expert answerHow do I check a specialty food shop’s prepared meals and kitchen setup?
- Expert answerHow do I review a thrift store’s sorting room, racks and storage layout?
- Expert answerHow do I assess a cheese shop’s ageing room and cold storage?
- Expert answerHow do I check a bait shop’s cold storage and aerated tank equipment?
- Expert answerHow do I check a moulder’s mould maintenance and storage racks?
- Expert answerHow do I check a threading kiosk’s thread supply, lighting and chair setup?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.