How do I judge a truck parking yard’s number of stalls for tractor-trailers?
Count the stalls yourself against the seller’s number, then test whether each one is usable with a full-length rig. Measure the stall length and width, check the lanes between rows and note any stall that blocks another or sits on bad ground. Use the usable count, not the painted one.
Get a stall map from the seller and walk it with a tape or measuring wheel. Count marked stalls, then count the ones where a rig could really park with the doors and landing gear clear. The two numbers can differ.
Check that the lanes work. A full row of stalls is worth little if drivers cannot back in without blocking the next lane. Visit when the yard is busy and watch the movement. Note stalls that are only usable when neighbours are away.
Look at the ground in each row. Soft or sloped spots reduce usable space. Look for stalls blocked by poles, drains or fence lines. Ask how the stall count has been used in the booking records and whether the seller ever oversold or turned drivers away. Ask your accountant to reconcile the usable count with the revenue per stall, and ask your lawyer to review any documents that set the layout. Ask what the yard does when a driver leaves a rig in the wrong stall, or when a stall is blocked by a broken-down unit. Note how the seller counts oversized equipment, and whether some stalls are reserved for particular uses. Those details can change the count a buyer relies on.
Key takeaways
- Count stalls yourself against the stated number.
- Test usable stalls with a full-length rig.
- Visit when busy to watch movement in the lanes.
- Reconcile the usable count with revenue per stall.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I evaluate a trucking company’s spare tractors and trailer pool?
- Expert answerHow do I judge a lumber yard’s forklifts, boom trucks and racking?
- Expert answerWhat should I check about a trucking company’s yard, shop and parking space?
- Expert answerWhat should I check about the bays and yard before buying a heavy truck repair shop?
- Expert answerHow do I judge a kayak rental shop’s shuttle trailers and transport vehicles?
- Expert answerHow do I judge the trailer hitch accessories a rental company sells?
- Expert answerHow do I judge an auto glass shop’s side window and heavy truck glass work?
- Expert answerHow do I judge the condition of a tree service’s chippers and bucket trucks?
- Expert answerHow do I judge a fleet shop’s mobile service truck setup?
- Expert answerHow do I judge the floors, doors and roofs on enclosed rental trailers?
- Expert answerHow do I judge the tools and lifts in a boat yard’s workshop bays?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.