How do I judge whether a machine shop’s floor has room for another machine?
Floor space is only the start. Measure the machine’s footprint plus the clearance around it for loading, service and material movement, then check power, compressed air, floor loading and the route in. A gap that looks empty may be needed for traffic, stock or an aisle the shop already uses.
Bring a tape measure and a drawing of the machine you have in mind. Mark the footprint and add room for the door swing, the bar loader or pallet changer, and a technician working at the back. Then trace how material moves through the shop: where raw stock arrives, where finished parts wait and where a forklift turns. A new machine that blocks that route costs more than it adds.
Next, look up. Check the utilities near the open spot: electrical capacity at the panel, the size of the nearest disconnect, compressed air supply and any chiller or extraction the machine would need. Ask whether the slab was poured to carry heavy machines and where cracks or patches show. Find out how a machine of that size would get through the doors.
Ask the seller what was planned for that space and why it remains empty. Ask your lawyer to review the lease for any limit on alterations, and have an electrician price the power work. Keep the machine supplier’s installation requirements on hand, because they set the real clearance and utility needs.
Key takeaways
- Measure footprint plus service clearance, then trace how stock and finished parts move around it.
- Check panel capacity, air supply, slab condition and the route into the building.
- Review lease terms on alterations with your lawyer before planning an addition, and ask a tradesperson to price utility work.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge whether a fabrication shop’s shop floor layout limits growth?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- Expert answerHow do I judge a machine shop’s mix of manual lathes and CNC machines?
- Expert answerHow do I judge a packaging distributor’s sample room and machine demonstrations?
- Expert answerHow can I judge the shop floor, hoist and overhead door of a farm equipment repair garage?
- Expert answerHow do I judge a powersports shop’s service department versus its sales floor?
- Expert answerHow do I judge whether a print shop’s customers would follow it to a new owner?
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerHow do I judge whether a body shop’s painters keep their skills current through training?
- Expert answerHow do I judge whether a snowmobile shop’s fall pre-season service bookings are reliable?
- Expert answerWhat makes one coffee shop more profitable than another?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.