How do I judge a window plant’s floor layout and glass-handling flow?
Trace a window through the plant in order: glass arrives, is cut, handled, assembled and shipped. Note where product waits, backtracks or gets lifted twice. Sketch the route on a floor plan and compare it with the output the seller reports. A layout that suits today’s volume may cap growth.
Start at the receiving door and follow the glass. Ask how sheets are stored, how they reach the cutting table, and how finished units travel to the shipping area. Count the handoffs on your sketch. Each extra handoff is a place for breakage, delay and strain on the crew.
Look at the equipment that moves glass: racks, carts, lifts, vacuum tools and any conveyors. Ask the seller for the maintenance history and note which pieces look worn or improvised. Check aisle width, turning room and whether forklifts and people share the same paths.
Then test the layout against growth. If a second shift or a new product line were added, which stage would jam first? Ask where extra racks, a larger cutting table or another assembly bench could go without rearranging the whole floor. Finally, ask the seller to describe a typical busy day and an unusually slow one, then compare both with your sketch. Have your accountant review any equipment lists and your lawyer review the lease on the building. Take photos from the same spot at different hours, so you can see how the floor looks under load. Photos also help your advisors follow your reasoning later, when you are no longer standing in the plant.
Key takeaways
- Sketch the route from receiving to shipping and mark every handoff, wait and backtrack.
- Ask for maintenance history on every piece of glass-moving equipment.
- Test the layout against extra volume, not only today’s output.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a window installer’s truck, lift and glass-handling cart setup?
- Expert answerWhat should I look at in a shower door company’s glass handling and suction cup equipment?
- Expert answerHow can I judge the shop floor, hoist and overhead door of a farm equipment repair garage?
- Expert answerHow do I judge an auto glass shop’s side window and heavy truck glass work?
- Expert answerHow do I judge whether a fabrication shop’s shop floor layout limits growth?
- Expert answerHow does winter slowdown affect a window washing company’s cash flow?
- Expert answerHow do I check a shower door installer’s glass template and measuring process?
- Expert answerWhat should I ask about a shower door company’s tempered glass supplier lead times?
- Expert answerHow do I judge a mirror shop’s silvering or bevelling equipment?
Due diligence
- Expert answerWhat should I check in a window cleaning company’s job-site damage and glass-scratch log?
- Expert answerHow do I judge a candle maker’s wax supplier reliability before buying?
- Expert answerHow do I judge how reliant a bath product maker is on one sales platform?
- Expert answerHow do I judge a leather goods maker’s hardware and thread stock?
- Expert answerHow do I check a tint shop’s lighting and glass-prep tools?
- Expert answerHow do I judge a van rental agency’s parking lot layout and vehicle flow?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.