How do I pass on my millwork shop’s finishing schedules and stain matching records?
Gather the schedules and stain records into one organized set a stranger could follow. For each finish, show the product steps, the drying sequence and the sample that proves the colour. A buyer is paying for repeatable results, so the records should let a new owner match last year’s work.
Start with the finishing schedule itself. Write down, job type by job type, the order of coats, sanding between them, spray or wipe method and the drying time you actually allow before the next step. Add the habits that never made it onto paper, such as how you adjust for a humid week, which spray tip suits which product, and when you refuse a job because the substrate will not take the finish.
Then turn to stain matching. Keep each customer’s approved sample, the formula or mix notes and the wood species it was tested on, since the same stain looks different on oak and maple. Photograph finished boards beside the sample under shop light and daylight, and label everything with the job name so a new finisher can find it in minutes. Note any colours that only one person on the floor could ever match by eye, because that is the knowledge most at risk.
Decide what you will hand over before a buyer asks. Some formulas may be your edge, so talk with your lawyer about confidentiality before opening the binder, and share the full set only once a buyer is serious. Offer to walk the finishing room together so the notes make sense.
Key takeaways
- Organize finishing schedules by job type, with coats, drying and sanding steps spelled out.
- Pair every stain formula with its approved sample, wood species and photographs.
- Share the full records only after a confidentiality agreement is in place.
Related reading
15 pages on the same subject, grouped by topic.
Succession
- Expert answerHow do I pass my print shop’s colour-matching know-how to a successor?
- Expert answerHow do I pass my woodworking shop’s jigs and techniques to a new owner?
- Expert answerHow do I pass on my cabinet shop’s design drawings and shop knowledge to a successor?
- Expert answerHow do I pass my pattern-making knowledge to the next owner of a sewing shop?
- Expert answerHow do I pass my print shop’s pressman know-how to a younger employee?
- Expert answerHow do I pass on stain-removal know-how from my dry cleaner to a successor?
Due diligence
Buying
- Expert answerWhat should I look at in a cabinet shop’s spray finishing room and ventilation?
- Expert answerHow do I judge the polishing, finishing and sanding equipment in a shoe repair shop?
- Expert answerWhat bindery and finishing equipment questions matter when buying a print shop?
- Expert answerHow do I check an auto upholstery shop’s leather hide supply and colour matching?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentWhat is succession planning?
- 02Business Development Bank of CanadaGovernmentAdvice for succession planning - Articles and tools
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.