What quality-check steps should an aerial mapping firm run before delivering orthomosaics?
Before delivery, check coverage for gaps, look along the seams for visible breaks, compare known points against the map for alignment, review colour and sharpness, and confirm the files open. A second person should review before anything is sent out.
A good routine is a list that every map passes through before it leaves the building. Start with coverage: does the image reach the full boundary of the job, and are there holes where images failed to match? Then walk the seams. Look for stretched buildings, doubled lines and colour jumps where images join.
Check alignment against known reference points and note the differences. Look at colour and brightness across the whole map, since changes in light during a flight can leave patches. Zoom into a handful of areas at full size to check sharpness. Finally, open the delivered files on a different machine, to confirm the format, the size and the settings are what was agreed.
Ask the firm to show its checklist and a few finished reviews with client names and details removed. Who signs off, and is it someone other than the person who built the map? What happens when a map fails: is it reprocessed, flown again, or sent with a note? Have your lawyer review the firm’s delivery agreements, and ask your accountant what rework costs in labour. Ask how often the checklist is updated after a miss.
Key takeaways
- Check coverage, seams, alignment, colour and sharpness on every map.
- Open the delivered files on a different machine.
- Ask who signs off and what happens when a map fails.
- Ask for a few finished reviews with details removed.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a survey firm’s respondent panel quality before buying?
- Expert answerDo I need to inspect a research firm’s survey platform subscriptions before buying?
- Expert answerWhat should I ask about a surveying firm’s survey markers, stakes and field supplies?
- Expert answerWhat calibration records should a surveying firm keep for its drone and scanning equipment?
- Expert answerHow do I find out if a technical writing firm’s quality relies on one senior editor?
- Expert answerWhat should I ask about the mapping tools behind a route-planning business?
Due diligence
Selling
- Expert answerHow do I show my research firm’s survey methods are documented and repeatable?
- Expert answerHow do I prepare my surveying firm’s drone and GPS gear for a buyer’s inspection?
- Expert answerHow do I document my surveying firm’s data processing steps for a buyer?
- Expert answerHow do I document my barcode firm’s warehouse scanning rollout steps for a buyer?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.