What should I ask about a finishing shop’s pre-treatment wash line upkeep?
Ask who looks after the wash line, what they do each day and what the records show. Clean metal is what makes a coating stick, so the stages, nozzles, tanks and chemical checks matter. Look for a routine that someone follows, not repairs that happen only after problems.
Ask to see the stages in order and watch parts move through. Look for clogged nozzles, scale on the walls, leaking seams, rust on the line, dirty parts leaving the washer and parts still wet after the dry-off oven. A well-kept washer is usually tidy, with each stage labelled and gauges that actually work.
Ask what testing happens, how often, and who does it. The shop should be able to show you its logs for chemical strength, temperature and any changes it made. Ask what the last major breakdown was, how long it took to fix, and what the shop did for customers meanwhile. If the logs are thin, treat that as a gap you need to fill.
Then ask about the costs around it. How much chemistry does the shop use, who supplies it, and how is waste water managed? Ask about the heater, pumps and tanks, and which are nearing replacement. Your accountant can help you work these into a forecast, and a specialist can look at the line with you. Also ask whether the operators have a written start-up and shut-down routine, and whether anyone besides the owner could run the line for a week. Ask for the supplier’s service notes too.
Key takeaways
- Watch parts come out and look for dirt, flash rust and wetness after drying.
- Ask for logs of chemical strength, temperature and cleaning.
- Find out which pumps, heaters and tanks are close to replacement.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
Buying
- Expert answerHow do I check the curing oven and spray booth at a powder coating shop?
- Expert answerHow can I tell whether a powder coating shop is profitable before I buy?
- Expert answerWhat should I check before buying a powder coating shop?
- Expert answerWhat should I look at in a cabinet shop’s spray finishing room and ventilation?
- Expert answerHow do I judge the racks and hooks inventory in a coating shop?
- Expert answerHow do I judge the polishing, finishing and sanding equipment in a shoe repair shop?
- Expert answerWhat bindery and finishing equipment questions matter when buying a print shop?
- Expert answerDo film and coating brand dealer agreements transfer when I buy a tint or detailing shop?
- Expert answerWhat happens to customers’ ceramic coating warranties when I buy a detailing shop?
- Expert answerWhat should I ask about a kebab shop’s charcoal or gas grill upkeep?
- Expert answerHow do I estimate how much a pro shop depends on pre-season rush?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.