What should I ask about a millwork shop’s dust collection and sanding stations?
Ask who designed the dust collection, how it is maintained and whether it keeps up when every station runs. Look at the collector, ducting, filters and the sanding stations, and for dust on beams, lights and machines. Ask what the shop does to reduce fire risk.
Walk the shop and look up as well as around. Fine dust on beams, lights and electrical boxes shows the system is not keeping up. Check the collector, the bags or filters and the ducting. Look for taped patches, kinked hoses or blast gates that no longer close. Ask how often the collector is emptied and who does it.
Then focus on the sanding stations. Do they have their own extraction, or do they rely on portable units? Ask whether operators use the extraction in practice, and what they wear. Poor dust control affects finish quality as well as the health of the people working there. Ask how the shop handles complaints about dust.
Finally, ask about risk and records. Ask how dust is stored before disposal, how ignition sources are managed and what the shop does about housekeeping. Ask for service invoices, changes made over time and any incident the shop remembers. An insurance adviser or a qualified industrial hygiene professional can review the setup and tell you what to improve. Ask what changed after the last time something went wrong. Ask also who trains new staff on the system.
Key takeaways
- Look up at beams and lights for fine dust build-up.
- Check ducting, blast gates, filters and the collector itself.
- Ask whether sanding stations are actually used with extraction.
- Ask how dust is stored and who handles housekeeping.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerWhat should I ask about a cabinet shop’s dust collection and finishing booth upkeep?
- Expert answerHow do I judge the condition of a body shop’s sanding and prep area?
- Expert answerHow do I check a fried chicken shop’s pressure fryers and breading station?
- Expert answerHow do I check a muffler shop’s collection of exhaust pipe diameters and adapters?
Buying
- Expert answerHow do I judge the polishing, finishing and sanding equipment in a shoe repair shop?
- Expert answerCan I buy a millwork shop with no woodworking experience?
- Expert answerHow do I judge the ventilation and dust control at a nail salon?
- Expert answerWhat should a buyer know about the drywall dust and cleanup practices of a company?
- Expert answerHow do I assess the stationary machines in a woodworking shop?
- Expert answerHow do I judge a woodworking shop’s reputation with local contractors?
- Expert answerWhat does a woodworking shop’s lumber supplier mix say about its stability?
- Expert answerWhat should I ask about a drywall company’s use of dust-free sanding systems?
- Expert answerWhat do dust collection and offcut disposal cost a foam fabricator each month?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.