What should I ask about a stained-glass studio’s kiln and grinder condition?
Ask for each machine’s age, service history and daily use, then see it run. For the kiln, ask about element and controller repairs and firing results. For the grinder, ask about bit wear, water supply and noise. Get a technician’s view if the equipment matters to the plan.
Start with a simple log request: when was each machine bought, who repaired it, and what was replaced? Kilns wear at elements, thermocouples, controllers and lids. Ask what firing programs the studio uses and whether results are even from one side to the other. On a grinder, the bits wear and the water feed needs upkeep. Ask how often the bits are changed and whether the water system is clean and working.
Watch a firing or a grinding session if you can. Look for uneven results, rough edges, odd sounds and signs of heat damage around the kiln. Check the power setup and ventilation around the equipment, and ask whether a qualified tradesperson did any installation or repair work. Do not assume the setup is sound just because it works today.
Finally, ask what the seller would do if either machine failed next month. Is there a backup, a local repair contact, a spare part on the shelf? Ask for manuals and spare parts as part of the sale and confirm exactly which machines are included in the written agreement. Ask to see finished pieces that came out of each machine. Ask whether either machine has ever stopped a project.
Key takeaways
- Ask for purchase dates, repairs and replaced parts for both machines, then see each one run.
- Watch for uneven results, rough edges and unusual sounds during a real session.
- Ask what the seller would do if either machine failed, and who they call for repairs.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I inspect a pottery studio’s kiln elements and shelves?
- Expert answerHow do I check a detailing studio’s polisher and extractor equipment condition?
- Expert answerHow do I check the floors and mirrors condition at a dance studio?
- Expert answerHow do I check the condition of vending machines and card readers on a route?
- Expert answerHow do I judge the age and condition of a bike shop’s rental fleet?
Selling
Buying
- Expert answerHow do I judge a butcher shop’s saw, grinder and slicer condition?
- Expert answerHow do I check the soundproofing and room condition of a recording studio?
- Expert answerHow do I judge the condition of a tree service’s stump grinders and climbing gear?
- Expert answerWhat should I check about a firewood business’s splitter, processor and kiln equipment?
- Expert answerWhat should I check about a sawmill’s planer and kiln drying capacity?
- Expert answerHow do I check how a pottery studio handles breakage in the kiln?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.