What should I ask about a sticker printer’s die-cutting and plotter equipment?
Ask what each machine can cut, how fast, how old it is, what it costs to keep running and who runs it. Then see which products depend on which machine. A sticker shop with one plotter doing most of the work is more exposed than one with a spare.
Begin with a list of the machines. For each, ask for the maximum size and type of material it handles, the kind of cuts it makes, the typical speed and the job types it carries. Then ask the seller to show the last jobs that each machine ran. A plotter that cuts custom shapes serves a different market from a die cutter that runs long, repeat shapes.
Ask about upkeep: blades, mats, cutting heads, software and service visits. Ask what breaks most often and what the shop does while a machine is down. A backup, or a nearby partner shop that can take overflow, makes a difference. Ask whether any cutting software is tied to one person’s licence and have your lawyer review whether it can continue for you.
Finally, ask about people and tooling. Who sets up the cuts? Where do the die files live? Are dies kept and catalogued? Ask your lawyer about any leased or financed machine, and consider an appraiser’s view on condition. Ask also how much of the shop’s revenue would be at risk if the busiest machine stopped for a week. Ask for the service history as well.
Key takeaways
- List each machine with its size, material limits, speed and typical jobs.
- Ask what breaks most often and what the shop does when a machine is down.
- Find out who sets up cuts and where die files and settings are kept.
Related reading
15 pages on the same subject, grouped by topic.
Selling
Buying
- Expert answerHow do I check a hardware store’s key-cutting and paint-mixing equipment?
- GuideBuying a tool and die shop in Canada
- Expert answerWhat should I ask about a packaging company’s printing press and die cutter condition?
- Expert answerHow do I judge the age of an engineering firm’s CAD workstations and plotters?
- Expert answerWhat should I ask about an architecture firm’s model-making shop and large-format plotters?
- Expert answerWhat should I look for in a banner shop’s wide-format cutting equipment?
Due diligence
- Expert answerHow do I verify a tile store’s cutting equipment and delivery truck condition?
- Expert answerHow do I check a packaging plant’s die and plate inventory?
- GuideTool and die shop due diligence
- Expert answerHow do I check the cutting and finishing equipment at a paper goods business?
- Expert answerWhat should I ask about the sail design software and plotter a sailmaker uses?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.