What should I check about a laser cutter’s assist gas supply and nitrogen setup?
Check how the gas gets to the machine: tank or bundle storage, piping, regulators and filters. Then list the storage equipment, noting which pieces are owned and which are leased, have your lawyer review the delivery agreement, and check how much gas the shop uses in a month. Running short mid-job is a real cost.
Walk the route the gas takes, from storage to the cutting head. Note the type of storage, the piping and fittings, the regulators and any filters or dryers along the way. Look for signs of leaks, patched lines or equipment that seems out of place. Ask who installed it and when.
Then ask about the supply arrangement. Storage tanks and cylinders are often supplied under an agreement. List the tools and equipment the business uses, noting which are owned and which are leased, and have your lawyer review the paperwork behind them. List each supply agreement with its renewal date and have your lawyer review them.
Ask for gas use as a monthly total, along with the hours the laser cut in the same month, so you can see how heavily the setup works. Compare cutting with nitrogen and with other assist gases in the work the shop does, since the mix of jobs changes the cost. Ask what happens when a delivery is late and how much reserve the shop keeps. Finally, ask whether the setup could cope with more volume, and what upgrading it would involve. Your accountant can help you plan for those costs.
Key takeaways
- Trace the gas route from storage to cutting head and note anything patched.
- List the tanks and fittings, noting which are owned and which are leased, and have your lawyer review the supply agreement.
- Compare monthly gas use with cutting hours to see what the setup costs to run.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I assess a sheet metal shop’s laser cutter and its uptime records?
- Expert answerHow do I assess a trophy shop’s laser engraving and sublimation printing setup?
- Expert answerHow do I judge a glass shop’s cutting table and tempering supplier setup?
- Expert answerHow do I judge a box plant’s die cutter and folder gluer equipment?
- Expert answerWhat should I ask about a packaging company’s printing press and die cutter condition?
- Expert answerWhat should I check in a gas station’s fuel supply agreement before buying?
- Expert answerWhat should I ask about a welding supply store’s relationship with its gas supplier?
- Expert answerHow do I check a medical supply store’s home delivery and equipment setup service?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to diversify your supply chain
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.