What should I look at in a drainage contractor’s GPS grade-control equipment?
Look at the receivers, control box, cabling and software on each machine, and ask when the system was last calibrated and checked against a known elevation. Ask about its age, any repairs, whether the software is current and what the contractor does when the signal drops.
Start with a physical check of every unit. Look at the receivers, antennas, mounts, cables and control boxes for damage and wear. Ask the seller to power the system up and run through a normal setup so you can see how long it takes and whether anything misbehaves. Note the make and age of each component on a list.
Then ask about accuracy. How often is the system calibrated, who does it and where are the results recorded? Ask how the crew checks its work, for example by comparing grades against a known point at the start and end of a job. Reliable records show an operation that treats accuracy as part of its routine.
Finally, think about support and cost. Ask whether the software is up to date, whether the supplier still supports the model, and whether subscriptions or correction services run on a recurring basis. If the equipment is financed, list each financing agreement and have your lawyer review it. Your accountant can place it in the equipment totals, and the written agreement should state which units are included. Ask the seller to show you a sample grade file from a finished job, since it makes clear what the system produces and how the crew uses the results.
Key takeaways
- Check receivers, mounts, cables and boxes, then watch the system run a normal setup.
- Ask for calibration records and how the crew checks its grades.
- Have your lawyer review the written agreement for what equipment and software are included.
Related reading
12 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow do I check a snow contractor’s GPS tracking records for each storm?
- Expert answerHow do I verify a tile store’s cutting equipment and delivery truck condition?
- Expert answerWhat should I look at in a masonry contractor’s scaffolding and mixing equipment?
- Expert answerHow do I check an excavation company’s drainage and weeping tile installation record?
- Expert answerHow do I check a nursery’s disease and pest control history before buying?
Buying
- Expert answerHow do I judge a grading company’s laser level and GPS machine control gear?
- Expert answerHow do I check what materials and spray equipment an insulation contractor owns?
- Expert answerHow do I check a welding shop’s ventilation and fume control equipment?
- Expert answerHow do I check which grade levels a tutoring centre’s students come from?
- Expert answerHow do I judge a lighting showroom’s mix of decorative and basic builder-grade fixtures?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.