What should I look at in a truss plant’s lumber waste and cut-list accuracy?
Compare the lumber bought against the lumber that ended up in finished trusses, as totals over the same period. After allowing for any change in stock on hand, the difference is waste. Then ask how the cut list is produced and how often parts are cut wrong, since a plant with a loose cut list throws away more than it needs to.
Ask the seller for purchases of lumber by grade in total, and for the volume that went into shipped trusses. Once any change in lumber on hand is allowed for, the gap between the two is the waste, and it should be explained: offcuts, damaged boards, rework or counting errors. A plant that tracks the gap and acts on it is better run than one that only knows the purchase total.
Then look at the cut list. Where does it come from, and how closely does the saw follow it? Ask how many parts have to be recut and why. Look at the scrap bin and the offcut pile. What is in it? Are the offcuts being reused for short members?
Finally, ask how waste is treated in the books. Read the inventory figures and the cost of materials with your accountant. Ask how the plant would improve the results if you owned it, and whether the software, the saw or the crew is the main cause of error. Ask for the same comparison for a second period, so that you can tell whether the waste is steady or changes with the season. Keep the figures and your questions in one place so your accountant can follow the trail.
Key takeaways
- Compare lumber bought with lumber shipped in trusses over the same period, allowing for stock on hand.
- Ask how often parts are recut and look at what is in the scrap pile.
- Have your accountant explain how waste and inventory appear in the books.
Related reading
13 pages on the same subject, grouped by topic.
Due diligence
- Expert answerWhat should I check about a lumber yard’s mill and truss supplier relationships?
- Expert answerHow do I check how a butcher shop handles trim waste and unsold cuts?
- Expert answerHow do I check a deck builder’s lumber waste and offcut handling?
- Expert answerHow do I check a furniture maker’s stock of kiln-dried lumber and slabs?
- Expert answerHow do I check a millwork shop’s drying kiln or storage for lumber?
- Expert answerHow do I check a pallet maker’s lumber and cutoff supply sources?
- Expert answerHow do I check a wood shop’s lumber stock for moisture and age?
- Expert answerWhat do a sawmill’s lumber yield per log records tell a buyer?
- Expert answerHow do I assess a jewellery maker’s waste metal and filings recovery?
Buying
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.