What should I look for in a sailmaker’s rigging and hot-knife workstations?
Look at each station as a working set: the tools, the bench, the cords and tips, the lighting and how the space is laid out. Ask about age, spare parts and what has been replaced, and watch the station in use. Note anything that looks improvised or worn out.
Walk both stations with the seller and list what is there: hot knives, tip sets, cord cutters, presses, swaging or splicing tools, benches and vises. For each, ask how old it is, what it is used for, and how often it is replaced. Look for worn handles, frayed cords, damaged stands and tools held together with tape.
Watch someone work. A good station lets the operator reach what they need without crossing the room, and keeps hot tools clear of cloth that is not being cut. Look at the bench surface, the lighting, the ventilation and the floor around it. Ask where spare tips and tools are kept, how many are on hand and what the loft does if a key tool fails mid-job.
Ask who is trained on each tool and what they would do differently with a bigger budget. Request any manuals and receipts. An outside tradesperson can give a view on condition and replacement cost. Your accountant can say how the tools are carried in the books, and your lawyer can review any lease or financing of the equipment.
Key takeaways
- List every tool with its age, use and replacement history.
- Watch a real job at each station.
- Ask where spare tips and parts are kept and how many.
- Get an outside opinion and a replacement estimate on tools that look worn or improvised.
Related reading
14 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow can I check a window cleaning company’s high-rise rigging gear?
- Expert answerHow do I check a call centre’s headset and workstation equipment before buying?
- Expert answerHow do I judge the headset and workstation setup used by an answering service’s agents?
- Expert answerHow do I check a butcher shop’s knife, scale and tool upkeep?
- Expert answerWhat should I ask about a hot sauce maker’s bottle and label supplier delays?
- Expert answerWhat should I check about the graphics tablets and workstations at an animation studio?
- Expert answerWhat should I check about a rendering studio’s GPU workstations and render nodes?
Buying
- Expert answerHow do I judge the age of an engineering firm’s CAD workstations and plotters?
- Expert answerHow do I judge a holiday decorating company’s installer ladder and rigging skills?
- Expert answerWhat should I ask about an event lighting company’s rigging crew?
- Expert answerHow do I check a kitchenware store’s knife sharpening and repair service?
- Expert answerWhat should I ask about a knife sharpening service’s restaurant pickup accounts?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.