Deavo
BuyingExpert answer · 1 min read

How do I assess a frame builder’s brazing hearth, tube mitre tools and jigs?

Inspect the brazing hearth, the tube mitre tools and the frame jigs one by one. Check condition and accuracy, find out which were made in the shop, and ask how much of the result comes from the tools and how much from the builder’s own hands.

Start with the hearth: its bench, fixtures, torches, gas lines and the fire-resistant surfaces around it. Ask for the age and service history of the regulators and hoses, and have a qualified person look over the setup before you rely on it. Ask the seller what they would replace first and why.

Next, the tube mitre tools and jigs. Ask to see a mitre cut and check how cleanly the tubes meet. Look at the jigs for worn pins, bent plates and play in the clamps. Measure a few key dimensions with a tool you trust. Jigs that have drifted produce frames that drift, and the drift may not show until a frame is finished.

Then ask who made what. Shop-made jigs are harder to replace, so ask whether drawings or spare fixtures exist. Ask how much of the shop’s quality depends on the builder’s eye rather than the tools. Your accountant can help you sort the equipment list, and a trained builder can look at the set with you. Ask to see the same frame model built twice, or photos of two, to judge how well the tooling repeats a result. Photograph each tool before you decide.

Key takeaways

  • Have a qualified person look over the hearth, torches and gas setup.
  • Check jigs for wear, bent plates and play, and measure key dimensions.
  • Ask which jigs are shop-made and whether drawings or spares exist.

Sources

This answer is checked against primary sources. Links were last confirmed on the dates shown.

  1. 01
    Business Development Bank of CanadaGovernment
    How to conduct due diligence when buying a business
    bdc.ca·Checked Oct 21, 2026
  2. 02
    Business Development Bank of CanadaGovernment
    Equipment valuation: How to do it
    bdc.ca·Checked Oct 24, 2026
  3. 03
    Business Development Bank of CanadaGovernment
    What are the steps to buying a business?
    bdc.ca·Checked Oct 21, 2026

Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.