How do I assess a moulding plant’s chillers and cooling water system?
Judge the cooling system by how steadily it holds temperature when the plant is busy. Ask about chiller age, capacity compared with the presses, water quality and upkeep, then look for signs of scale, leaks or hot spots. Inconsistent cooling shows up as longer cycles and uneven parts.
Start on a busy day if you can. Check the temperatures the system holds while all the presses run, and ask whether they drift in summer. If the plant has added presses over time, ask whether the cooling was upgraded to match. A system sized for fewer machines often limits output without anyone saying so.
Then look at the water side. Ask about treatment, filters, strainers and how scale is managed. Look at hoses, manifolds and fittings for leaks, corrosion or patched repairs. Check the cooling tower or heat exchanger if there is one. Poor water quality blocks mould channels slowly, and the effect appears as longer cycles.
Finally, ask about the records. Who services the chillers, how often and what did they find? What would the plant do if one failed in the middle of a hot week? Is there a backup or a plan? Ask which moulds are most sensitive to cooling, and whether any customers have complained about warped parts. A qualified mechanical technician can assess the system for you. Ask for the maintenance history, then compare it with what you see in the plant room.
Key takeaways
- Check temperature stability while all presses are running.
- Ask whether cooling kept pace as presses were added.
- Look for scale, leaks and patch repairs on the water side.
- Ask what the plant would do if a chiller failed.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I assess the downtime records of a plastics moulding plant’s chillers and dryers?
- Expert answerHow do I check a plastics plant’s regrind and scrap handling practice?
- Expert answerHow do I assess a packaging plant’s forklift and loading dock setup?
- Expert answerHow do I find a plastic injection moulding shop for sale in Canada?
- Expert answerHow do I assess a mobile detailing business’s generator and water tank equipment?
- Expert answerHow do I assess a lavender farm’s plant age and distilling equipment?
- Expert answerHow do I assess a body shop’s frame machine and measuring system condition?
- Expert answerHow do I assess a granola maker’s baking ovens and cooling racks?
Due diligence
- Expert answerHow do I check a plastics moulder’s resin supply and material handling system?
- Expert answerHow do I judge the age and tonnage mix of a plastics plant’s moulding presses?
- Expert answerHow do I check a car wash’s water recycling system before buying?
- Expert answerHow do I check a brewery’s fermentation tanks and glycol chiller condition?
- Expert answerHow do I check a candle maker’s pouring-room temperature and cooling routine?
- Expert answerHow do I check a rehearsal studio’s PA systems and microphone stock?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.