How do I check a collision shop’s paint booth condition before buying?
Watch the booth work, then inspect it. Look at airflow, filters, heating, lighting and doors, read the service log, and ask when major parts were last replaced. Have a qualified technician examine it if you plan to rely on it, and ask what a replacement would involve.
Begin with a working demonstration. Ask the painter to run a cycle while you watch: does the booth heat up evenly, does air move smoothly, is there overspray settling on the walls or ceiling? Look at the lighting, since poor light leads to rework, and at the doors, seals and floor grates for wear.
Then read the paper. Ask for the service log, filter change records, burner or heater repairs and invoices for any parts replaced. A booth that is cleaned and serviced on a regular pattern tells a different story than one repaired only after failures. Ask who services it and how fast they can attend.
Next, think about the surroundings. Look at how the booth is vented, how the paint and waste areas sit around it, and whether anything looks cramped or improvised. Ask your insurer and your lawyer what to raise with the landlord about the building, and ask a qualified inspector to look at anything that concerns you. Finally, ask the shop how many cars pass through the booth in a week and whether it is a bottleneck. A booth at its limit may need replacing sooner than you plan. Your accountant can help you set aside funds for that.
Key takeaways
- Watch a full cycle: heat, airflow, lighting, doors and overspray.
- Read the service log and filter records, and ask who services the unit.
- Ask whether the booth is a bottleneck and what replacing it would involve.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerWhat should I ask about a collision shop’s reliance on one paint supplier?
- Expert answerHow do I assess a body shop’s frame machine and measuring system condition?
- Expert answerHow do I check the curing oven and spray booth at a powder coating shop?
- Expert answerHow do I assess a welding shop’s plasma table, press brake and welder condition?
- Expert answerHow do I judge a butcher shop’s saw, grinder and slicer condition?
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- GuideBuying an auto body and collision repair shop in Canada
- Expert answerHow do I read a body shop’s paint mixing system and tint supplier setup?
Due diligence
- Expert answerWhat should I ask about a cabinet shop’s dust collection and finishing booth upkeep?
- Expert answerHow do I judge the age and condition of a bike shop’s rental fleet?
- GuideAuto body and collision repair shop due diligence
- Expert answerHow do I judge a sandwich shop’s slicer and prep fridge condition?
- Expert answerWhat should I ask about an antique shop’s dealer booths and rent-paying vendors?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.