How do I check how a boat builder tracks hull moulds' wear and repairs over time?
Ask whether the shop keeps a running record for each mould that shows how many boats it has produced, what repairs were made, who made them and when. A shop that keeps such a record can show the condition of its most important tools. A shop without one is relying on memory.
Hull moulds are the shop’s core tools, and every model depends on one or more of them. Ask to see how the builder keeps track of each mould. A good record names the mould, notes each repair, records resurfacing or re-waxing, and links any surface flaw to a pattern on finished hulls. Ask whether repairs are done in-house or sent out, and who decides when a mould is retired.
Then look at the moulds themselves with someone who knows the work. Check the gelcoat surface, the flanges, the stiffening and the storage. A mould kept off the floor and covered tells you something about how the whole shop is run. Ask whether any mould is close to the end of its useful life and what the plan would be to replace it.
Finally, ask how a new owner would learn the mould history if the person who keeps it all in their head were gone. Add replacement planning to your list of questions for your accountant. A mould history that a buyer can read in one sitting, kept in a single binder or file, shows care in a way that few other records do.
Key takeaways
- Ask whether the shop keeps a record of output, repairs, resurfacing and retirement decisions for each mould.
- Look at surface, flanges, stiffening and storage with a person who knows composite work.
- Find out which moulds are close to replacement and how that would be planned.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I review a boat dealer’s relationships with engine and hull manufacturers?
- Expert answerHow do I find out how a display builder handles last-minute show-floor repairs?
- Expert answerHow do I inspect the travel lift and haul-out equipment at a boat repair yard?
- Expert answerHow does a boat repair shop make its money?
- Expert answerWhat should I ask about a boat repair yard’s fuel and chemical storage on site?
- Expert answerWhat should I check before buying a boat repair shop?
- Expert answerWhat spare parts inventory should a moulding shop keep for mould repairs?
Selling
- Expert answerHow do I hand over my millwork shop’s builder accounts without losing them?
- Expert answerHow do I hand over my flooring store’s builder and contractor accounts to a buyer?
- Expert answerHow do I hand over my masonry company’s relationships with architects and builders?
- Expert answerHow do I hand over my charter boat’s repeat bookings and guide reviews?
- Expert answerHow do I hand over my marina’s relationships with boat owners and yacht clubs?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.