How do I check a hydraulic hose shop’s crimper and die condition?
Inspect the crimper and the die sets with the owner showing you how each is used. Look for wear, damage and missing sizes, ask when the machine was last serviced, and check that the dies in the cabinet match the hose and fittings the shop actually sells.
Ask the owner to run the crimper. Listen for odd noises, watch for slow or uneven movement and look for leaks around the hydraulics. Check for visible damage on the die faces and for rust on the cabinet. A worn die set can produce assemblies that look fine but do not hold.
Then check the dies against the work. Is there a die for every hose and fitting the shop sells? Which are missing, and which are worn from heavy use? Ask how the shop decides when to replace a set, and who keeps track. Ask whether there is a routine for checking the finished assembly against the fitting maker’s guidance.
Look at paperwork: service invoices, calibration notes if any, and receipts for replacement dies. Ask when the crimper was bought and whether it is owned outright. A second opinion from a technician or the machine’s dealer can tell you more than your own eye. Your accountant can see how the equipment is recorded, and your lawyer can confirm in the agreement what comes with the sale. If the shop has more than one crimper, repeat the check on each, and ask which one handles the bulk of the work and which stays in reserve.
Key takeaways
- Watch the crimper run and examine every die set for wear.
- Compare the dies on hand with the hose and fittings sold.
- Collect service and replacement records and confirm ownership.
Related reading
12 pages on the same subject, grouped by topic.
Due diligence
- GuideTool and die shop due diligence
- Expert answerHow can I verify a game console repair shop’s microscope and hot-air rework station condition?
- Expert answerHow do I check a kayak rental shop’s lake or river conditions across the season?
- Expert answerHow do I judge the age and condition of a bike shop’s rental fleet?
- Expert answerHow do I judge the condition of a body shop’s sanding and prep area?
- Expert answerHow do I judge a sandwich shop’s slicer and prep fridge condition?
Buying
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.