How do I check a machine shop’s chip conveyors and coolant filtration systems?
Look at the conveyors running, the filtration tanks and the coolant itself. Clean, steady systems with a maintenance routine point to care; leaks, odour, sludge or constant workarounds point to deferred upkeep. Ask who maintains them, how often, and what the last major repair involved.
Walk the shop with the machines running if possible. Watch whether chips move cleanly or jam, listen for strain in the drives and look under the conveyors for spilled coolant or swarf. A conveyor that stops often costs production, and operators often invent fixes the owner has stopped noticing.
Coolant tells a story. Check its colour, smell and level. Ask how it is tested, topped up and changed, and who does it. Neglected coolant can damage machines, cause skin trouble for staff and shorten tool life. Ask where the used coolant and chips go and who collects them, because disposal arrangements are part of running costs.
Then look at the filtration equipment: tanks, pumps, filters and chillers if present. Ask for service records and invoices. Find out whether the system is shared across machines or dedicated to each, and what a failure would stop. Ask your accountant how much of the spending is recurring. An environmental or safety adviser can help you judge anything that worries you. Ask also how much floor time goes to cleaning up around the machines. Ask what backup exists if a pump fails during a long run, and who the shop would call.
Key takeaways
- Watch conveyors under load and look for jams, leaks and swarf.
- Check coolant colour, smell and the testing routine.
- Ask where used coolant and chips go and who handles them.
- Request service invoices for filtration equipment.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerWhat should I ask about a machine shop’s coolant handling and chip disposal routine?
- Expert answerHow do I assess a body shop’s frame machine and measuring system condition?
- Expert answerHow do I find out how a fish and chips shop buys its haddock and cod?
- Expert answerHow do I gauge how a fish and chips shop copes with a rise in fish costs?
- Expert answerShould I buy a fish and chips franchise or an independent chip shop?
- Expert answerWhat should I check before buying a fish and chips shop?
- Expert answerHow do I check a bike shop’s spring tune-up backlog and booking system?
- Expert answerHow do I read a body shop’s paint mixing system and tint supplier setup?
- Expert answerHow do I check a transmission shop’s flush machine and fluid exchange equipment?
- Expert answerHow do I look at a cross-dock’s conveyor and dock plate condition?
- Expert answerHow do I judge the age and condition of a nursery’s potting machine and conveyors?
Selling
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.