How do I check a machine shop’s spindle hours and machine service history?
Compare each machine’s hour meter with its service log and repair invoices, and see whether the numbers tell the same story. Ask about crashes, spindle rebuilds and unplanned stops. A shop that logs its maintenance and acts on it gives you more to go on than one with a low hour count and no paper.
Hour meters can mislead. A low reading may mean light use, a replaced control or a meter that has been reset. Ask for the machine’s full history: purchase date, service visits, spindle work, and any changes to controls or drives. Match invoices against the log, and ask the seller to explain gaps.
Then look at behaviour. Ask the operators how the machine runs: any odd noises, drift, heat, or slow warm-ups. Run a test cut and measure it. Ask for records of crashes and what was done afterward. A rebuilt spindle is not a flaw by itself, but the quality of the work and who did it matters.
Finally, look at how upkeep is planned. Is there a schedule for lubrication, coolant, filters and checks, and does anybody follow it? Ask what the shop spends on repairs in a normal year, which machines cause the most stops, and what the plan is for ageing machines. An equipment appraiser can give an independent view, and your accountant can show how repairs affect the shop’s cash flow and its ability to carry debt. Ask the seller which machine they would replace first, and why. That answer often shows where the real worries are.
Key takeaways
- Match hour meter readings with service logs and repair invoices, and ask about any gaps.
- Ask operators how each machine behaves, then run a test cut and measure it.
- Look at the maintenance schedule and which machines cause the most stops.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerWhat should I look for in a fabrication shop’s quote history versus actual job hours?
- Expert answerWhat should I ask about a vending route’s machine ages and breakdown history?
- Expert answerHow do I check a fabric store’s sewing machine sales and service arrangements?
- Expert answerHow do I check the service contracts on a print shop’s digital presses?
- Expert answerHow do I read a motor shop’s repair history and nameplate records?
- Expert answerHow does a compressor company handle after-hours breakdowns at plants?
Buying
- Expert answerHow do I check a commercial printer’s press hours and service history?
- Expert answerHow do I check a screen printing shop’s direct-to-garment printer maintenance history?
- Expert answerHow do I find out how a fleet shop handles after-hours breakdown calls?
- Expert answerHow do I judge a ramen shop’s broth hours and noodle supply before buying?
- Expert answerHow old is the dry cleaner’s solvent machine, and how do I check its service record?
Selling
- Expert answerHow do I document my arcade’s machine repair history for a buyer?
- Expert answerHow do I explain the after-hours work at my fleet maintenance shop to a buyer?
- Expert answerHow do I prepare an eyewear shop’s repeat customer lens prescriptions history for a handover?
- Expert answerHow do I present a scale service company’s customer calibration history to a buyer?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.