How do I check a millwork shop’s hardwood supplier and stock quality?
Look at the stock itself and the relationship behind it. Ask which supplier provides most of the hardwood, how stock is graded and stored, and what happens when a delivery is poor. Moisture, flatness and grain match in the racks tell you how carefully the shop buys.
Begin with the supplier. Ask for purchase records and see how much comes from one source. Ask whether the shop has a relationship with a particular salesperson, who sorts and picks the boards, and how disputes about quality are settled. One supplier who knows the shop well is helpful, but it is also a dependence to understand.
Then examine the stock. Walk the racks. Are boards stacked flat, stickered and off the floor? Is the stock sorted by species and grade? Look for warping, staining, checking and damage. Ask how long wood is acclimatized before milling, and how moisture is checked. Poor storage causes movement after install, and that shows up as callbacks.
Finally, ask about waste and inventory. How much stock is left over from past jobs, and is any of it unusable? Does the shop write off or count old boards? Ask how rare species or matched lots are sourced for custom work. Your accountant can help you see how the stock is recorded, and a seasoned woodworker can help judge it. Ask what the shop would do if its supplier raised prices or stopped delivering.
Key takeaways
- Review purchase records to see how much depends on one supplier.
- Walk the racks and look for warping, staining and poor stacking.
- Ask how moisture is checked before milling.
- Ask how leftover and unusable stock is treated.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerWhat should I ask about moulding suppliers and stock at a frame shop?
- Expert answerHow do I check a cabinet shop’s hardware and sheet goods supplier terms?
- Expert answerHow do I check a print-on-demand shop’s mockups and product page quality?
- Expert answerHow do I check a print-on-demand shop’s product quality complaints?
- Expert answerHow do I check a welding shop’s quality control and rework records?
- Expert answerHow do I check a wood shop’s lumber stock for moisture and age?
- Expert answerHow do I check a spice shop’s jar and packaging supplier for steady quality?
- Expert answerHow do I check a motor shop’s stock of replacement motors and drives?
Buying
- Expert answerWhat does a woodworking shop’s lumber supplier mix say about its stability?
- Expert answerHow do I check a wrap shop’s vinyl install quality before buying?
- Expert answerWhat should I ask about a trophy shop’s blank supplies and stock?
- Expert answerWhat should I look at in a sign shop’s stock of aluminum, acrylic and LED modules?
- Expert answerHow do I check an embroidery shop’s thread and backing supplier relationships?
- Expert answerWhat should I ask about a screen printing shop’s blank garment suppliers?
- Expert answerWhat should I ask about a rewind shop’s copper wire and varnish suppliers?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentHow to diversify your supply chain
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.