How do I check a muffler shop’s pipe bender and exhaust welding equipment?
See the bender and welders work on a real job, then check dies, tooling and consumables. A bender with a full set of dies and a welder in steady use deserve more trust than a machine with missing parts. Ask for service records and check whether any item is leased.
The bender is the heart of a custom exhaust shop, so begin there. Ask to watch a bend from start to finish. Look at how clean the curve is, whether the machine holds its setting and how long the operator takes to change dies. Count the dies and mandrels. A machine with gaps in its tooling may limit what the shop can build, and replacements can be slow to arrive.
Then look at the welders and cutting gear. Check leads, torches, gas lines, regulators and the condition of the work area. Ask who uses each welder, what it is used for and how old it is. Ask when it was last serviced and whether the shop keeps a log. Good habits around gas storage and ventilation say something about the culture of the whole workshop.
Finally, settle ownership. Ask whether any machine is leased or pledged, and whether staff brought their own. A written equipment list belongs in the agreement, and your lawyer can draft it. An independent equipment dealer can help you judge condition and replacement. Ask also whether any specialty jigs or fixtures were built in-house, and who knows how to use them.
Key takeaways
- Watch the bender and welders work before you form an opinion.
- Count dies, mandrels and consumables, and ask what replacements involve.
- Write down which equipment is owned, leased or staff-owned before closing.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a welding shop’s ventilation and fume control equipment?
- GuideBuying a welding shop in Canada
- Expert answerHow do I assess a farm repair shop’s welding and fabrication capabilities?
- Expert answerHow do I assess a welding shop’s plasma table, press brake and welder condition?
- Expert answerHow do I assess a welding shop’s stock of steel, gas and consumables?
- Expert answerHow do I check an irrigation installer’s pipe, fittings and head inventory?
Selling
Due diligence
- Expert answerHow do I check a welding shop’s quality control and rework records?
- Expert answerHow do I find out if a welding shop’s repeat work comes from one plant?
- GuideWelding shop due diligence
- Expert answerWhat should I check about a welding shop’s gas cylinder and consumables storage?
- Expert answerWhat should I ask about a car audio shop’s tuning equipment and sound analyzers?
- Expert answerHow do I check a rustproofing shop’s spray wands and pump equipment?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.