How do I check a rustproofing shop’s spray wands and pump equipment?
Run the equipment and watch it work. Check the pump for pressure and leaks, the hoses and fittings for wear, and each wand for blockage or odd spray patterns. Then ask about maintenance records, spare parts and what is leased or financed.
Ask a technician to run the system while you watch. The pump should hold steady pressure without leaking, and each wand should produce an even pattern. Feel hoses for cracks and look at fittings for residue or drips. Ask how often parts are replaced and where they come from. Parts that are hard to find can stall the shop.
Then ask for the maintenance log. Even a rough notebook shows whether someone takes care of the equipment. Ask who services the pump, what the last repair was and what it would take to replace the set. Equipment that runs only because of one clever repair person is a risk to plan for. Have a qualified outside person look at the setup if you are not familiar with it.
Last, confirm what the shop has. Ask whether any pump, compressor or wand set is leased, financed or borrowed from a supplier, and ask your lawyer to read the agreement for what it means in a sale. Keep fluid handling and safety practice in mind and ask the seller how the team deals with spills and cleanup, then confirm the details with the right professionals. Ask what spare wands, tips and seals sit on the shelf, and when the last one was used. A shop with no spares may lose a day each time a small part fails.
Key takeaways
- Watch the pump and wands operate, and examine hoses and fittings for wear.
- Ask for maintenance notes and find out who services the system.
- Confirm in writing which pieces are owned, leased or financed.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check what materials and spray equipment an insulation contractor owns?
- Expert answerHow do I check where a rewind shop’s pump motor repairs come from?
- Expert answerHow do I check the curing oven and spray booth at a powder coating shop?
- Expert answerWhat should I look at in a cabinet shop’s spray finishing room and ventilation?
- Expert answerHow do I assess a motorcycle shop’s tire-changing and dyno equipment?
- Expert answerHow do I check a collision shop’s equipment maintenance schedule?
- Expert answerHow do I check a fountain shop’s pump and basin stock turnover?
- Expert answerHow do I check the high-pressure pumps and wands in a self-serve car wash bay?
Due diligence
- Expert answerHow do I check the booth filters and spray guns at a powder coating shop?
- Expert answerHow do I check an auto upholstery shop’s equipment and maintenance?
- Expert answerHow do I check a motorcycle shop’s dynamometer and diagnostic equipment?
- Expert answerHow do I check a muffler shop’s pipe bender and exhaust welding equipment?
- Expert answerHow do I check that an oil change shop’s bay equipment is in working order?
- Expert answerHow do I judge a small-engine shop’s outdoor power equipment trade-ins?
- Expert answerHow do I check a maple dealer’s sap-handling gear like pumps, vacuum and tanks?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.