How do I check the booth filters and spray guns at a powder coating shop?
Check the booth when it is working. Filters should look maintained and airflow should pull overspray toward them, not out into the shop. Test each spray gun for steady output and clean spray patterns. Ask how often filters and gun parts are replaced and whether the shop has spares on hand.
Stand at the booth during a spray run and look at where the powder goes. Overspray drifting past the opening, dust on nearby surfaces or a booth that is hard to keep clean points to weak airflow or clogged filters. Look at the filters themselves for damage, heavy loading and a replacement habit that seems to follow a schedule rather than a crisis.
Handle the guns. Ask the operators how each one performs, then watch for spitting, uneven fan patterns or cords and hoses that are cracked and patched. Ask which parts wear first, how often nozzles, electrodes and pumps are changed and who does the rebuild. Look at the spares shelf to see whether it holds the common items.
Ask about colour changes. A booth that cleans quickly saves a lot of time on short runs, so see how long a changeover takes. Find out whether the booth is original or has been modified, and who services the controls. Have someone who knows application equipment look at the system with you. Ask who keeps the manuals and settings notes, because a new operator will need them in the first week. Also ask whether the booth has ever caused a stoppage, and how long the last repair took.
Key takeaways
- Watch overspray to see whether the booth pulls air as it should.
- Test each gun for steady output, even patterns and sound hoses.
- Time a colour change and look at the spare parts stock.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check the curing oven and spray booth at a powder coating shop?
- Expert answerWhat should I look at in a cabinet shop’s spray finishing room and ventilation?
- Expert answerHow can I tell whether a powder coating shop is profitable before I buy?
- Expert answerWhat should I check before buying a powder coating shop?
- Expert answerHow do I judge the racks and hooks inventory in a coating shop?
- Expert answerHow do I judge the polishing, finishing and sanding equipment in a shoe repair shop?
- Expert answerWhat bindery and finishing equipment questions matter when buying a print shop?
- Expert answerDo film and coating brand dealer agreements transfer when I buy a tint or detailing shop?
- Expert answerWhat happens to customers’ ceramic coating warranties when I buy a detailing shop?
Due diligence
- Expert answerWhat should I ask about a cabinet shop’s dust collection and finishing booth upkeep?
- Expert answerWhat should I ask about an antique shop’s dealer booths and rent-paying vendors?
- Expert answerHow do I check that a body shop’s paint booth filters and masking supplies are reordered on time?
- Expert answerHow do I check a rustproofing shop’s spray wands and pump equipment?
- Expert answerHow do I check a wheel repair shop’s CNC lathe and powder coating oven?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.