How do I check a wheel repair shop’s CNC lathe and powder coating oven?
See both machines running a real job, ask for service records and find out who can operate and maintain each one. Then check the age of the controller and the oven, the availability of parts and whether either is leased or financed.
A lathe and an oven are the heart of a wheel repair shop, and the cost of a failure is high. Ask to see each used on a real wheel from start to finish. Listen to the lathe for unusual noise, and look at the finish it leaves. For the oven, ask how it holds and spreads heat, and look at the door seals, racks and controls.
Ask for service history on both. Who services them, how often, and what was the last big repair? Find out whether replacement parts and support are easy to get for these models. An older controller that no one supports can turn a small fault into a long shutdown. Ask a qualified outside technician to look at both if you are not familiar with them.
Then look at who runs them. If only the owner can set the lathe program or manage the oven cycle, the skill leaves with them. Ask who else is trained. Confirm in writing whether each machine is owned, leased or financed, and ask your lawyer to read any related agreement before relying on the equipment list.
Key takeaways
- Watch each machine run a real job and examine the results.
- Ask for service records and check whether parts and support are easy to get.
- Find out who besides the owner can operate each machine, and confirm ownership in writing.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check the curing oven and spray booth at a powder coating shop?
- Expert answerHow can I tell whether a powder coating shop is profitable before I buy?
- Expert answerHow do I judge a powder coating shop’s rework and rejected part rates?
- Expert answerWhat should I check before buying a powder coating shop?
- Expert answerHow do I check a tire shop’s wheel balancer and mounting machine condition?
- Expert answerHow do I find a powder coating business for sale in Canada?
- Expert answerWhat should I look for in a woodworking shop’s CNC router maintenance history?
Due diligence
- Expert answerHow do I check the booth filters and spray guns at a powder coating shop?
- Expert answerHow do I find out how a luggage shop handles repairs on broken zippers and wheels?
- Expert answerHow do I check how a cheese shop handles wheels that have not sold before they turn?
- Expert answerHow do I check a sharpening shop’s stock of grinding wheels and abrasives?
- Expert answerWhat should I ask about a skate shop’s deck, truck and wheel stock aging?
- Expert answerWhat should I look for in a ceramics studio’s wheels and slab roller upkeep?
- Expert answerHow do I check a 3D printing bureau’s mix of resin, powder and filament machines?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.