How do I judge a powder coating shop’s rework and rejected part rates?
Ask the shop how it tracks parts that must be stripped, recoated or refused, and look at the records. A small number of rejects on a few jobs is normal. A pattern tied to one customer, one oven or one operator is a different story, because rework quietly eats labour, powder and oven time.
Ask whether anyone writes rejects down. If the shop keeps reject slips, rework tickets or customer complaints, read them for patterns. Which jobs come back, which finishes cause trouble, and which customers are the strictest? If nothing is recorded, that tells you something too, and you will have to watch the line yourself before you can say how often it happens.
Next, trace the causes. Poor pre-treatment, bad grounding, oven temperature drift and rushed masking all create rework. Ask what the shop has changed to prevent each one, and look at the cured parts for orange peel, thin spots or pinholes. A strong shop can tell you what went wrong last time and how it fixed it.
Then connect the rework to money. Ask how much oven time, powder and labour go into redoing parts, and whether the shop charges customers or absorbs the cost. Your accountant can help you see whether the margins in the books already include that waste. Ask a few customers, with the seller’s permission, how often they send parts back. Keep your own notes on what you observe during visits, so you can compare them with what the seller reports later.
Key takeaways
- Read reject slips and rework tickets for repeat customers, finishes and operators.
- Link each cause, such as pre-treatment or grounding, to a fix.
- Ask whether the books show the cost of redoing work.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge the racks and hooks inventory in a coating shop?
- Expert answerHow do I check the curing oven and spray booth at a powder coating shop?
- Expert answerHow do I judge the polishing, finishing and sanding equipment in a shoe repair shop?
- Expert answerHow can I tell whether a powder coating shop is profitable before I buy?
- Expert answerWhat should I check before buying a powder coating shop?
- Expert answerWhat should I look at in a cabinet shop’s spray finishing room and ventilation?
- Expert answerWhat bindery and finishing equipment questions matter when buying a print shop?
- Expert answerDo film and coating brand dealer agreements transfer when I buy a tint or detailing shop?
- Expert answerWhat happens to customers’ ceramic coating warranties when I buy a detailing shop?
- Expert answerWhat should I know about a trailer maker’s paint line and powder-coat oven?
Due diligence
- Expert answerHow do I check a commercial laundry’s rework and complaint rates?
- Expert answerWhat should I ask about a cabinet shop’s dust collection and finishing booth upkeep?
- Expert answerHow can I tell if a machine shop’s scrap and rework rate is under control?
- Expert answerHow do I check a wheel repair shop’s CNC lathe and powder coating oven?
- Expert answerHow do I check a laundry plant’s reprocessing rate for stained or rejected items?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.