What should I know about a trailer maker’s paint line and powder-coat oven?
Ask for the age and make of each piece of the line, its service notes, how many trailers it finishes in a normal week and what it costs to run. Then watch it work. A line that is well kept and matched to the plant’s output is an asset. One that is patched together is a cost.
Start with throughput. Ask how many units the line finishes in a week and how that compares with the plant’s build rate. If the line is the slowest step, it limits the whole business. If it sits idle, ask why it was bought. Ask for the energy use of the oven and booth in total, and what it costs in a normal month.
Next, look at upkeep. Ask when the oven last had a thorough service, how it is cleaned, and who looks after it. Look at the pre-treatment area, the racks and the booth filters. Ask how often finishes are redone and what causes it. Rework figures are a better guide than anyone’s opinion.
Finally, ask about replacement. Which parts are close to the end of their life, and what would they cost? Check whether any of it is leased or financed and have your lawyer review those agreements. Ask a qualified specialist to look at the line with you, and ask your accountant how capital spending fits your plan. Ask to see the line run on a normal day as well as on a day the seller has prepared, and note any differences.
Key takeaways
- Compare the line’s weekly output with the plant’s build rate to see if it is a bottleneck.
- Ask for service notes, rework figures and the running cost of the oven and booth.
- Have your lawyer review any leased or financed parts of the line.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I assess a granola maker’s baking ovens and cooling racks?
- Expert answerWhat should I look at in a hot sauce maker’s bottling line before buying?
- Expert answerHow do I judge a pet treat maker’s dehydrator and oven capacity?
- Expert answerHow do I review a trade show display maker’s portable booth product line?
- Expert answerHow do I check the curing oven and spray booth at a powder coating shop?
- Expert answerHow do I judge a wholesale cookie baker’s industrial mixer and oven line?
- Expert answerHow do I judge the paint striping equipment used by a line painting company?
- Expert answerHow do I judge a powder coating shop’s rework and rejected part rates?
- Expert answerWhat should I know about a paving company’s dump trucks and tack-coat sprayers before buying?
Due diligence
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
- 03Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.