What should I look for in a woodworking shop’s CNC router maintenance history?
Look for a dated service log, records of parts replaced, and proof that the machine still cuts accurately. Then ask about the control software, the tooling, and who the shop calls when something breaks. A router with no history is a machine you must inspect twice.
Ask for the service log first. Useful entries name the date, the work done and who did it: spindle service, bearing and rail care, belts, vacuum pump, dust collection and calibration. Gaps are worth asking about. Then see the machine work. Ask the owner to run a typical job, and measure the result. Listen for noise from the spindle, watch for drift, and check that the cut edges are clean. If you can, bring a tradesperson who knows routers. Ask about the software and the files. Which programs run the machine, whose licence do they sit under, and are the job files stored somewhere the business can reach? Ask your lawyer what can be done about the software and the job files, and put the answer in writing.
Look at consumables and spare parts. Ask what tooling is on hand, how often bits are changed, and what the downtime has been when a part failed. A shop with a known repair contact is better placed. Finally, compare the machine’s age and hours with what a replacement would involve. Ask also whether the machine has ever crashed or had a major repair, and what that cost in lost production days. Ask to see the maintenance log for the router, and note who services it, how often bits and belts are replaced and when it last sat idle.
Key takeaways
- Read the service log and ask about any gaps.
- Watch the machine cut a typical job and check the result.
- Ask your lawyer about the software licences.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a woodworking shop’s CNC router and nesting software?
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerWhat should I ask about a sign shop’s CNC router and cutting table?
- Expert answerWhat does an old CNC mill’s maintenance log tell me about a machine shop?
- Expert answerHow do I check a screen printing shop’s direct-to-garment printer maintenance history?
- Expert answerHow do I assess the wide-format printers and routers in a sign shop?
- Expert answerHow do I check a CNC shop’s probing and tool-setting equipment?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- Expert answerHow do I judge a machine shop’s mix of manual lathes and CNC machines?
- Expert answerWhat is owning a CNC machine shop like day to day?
Due diligence
- Expert answerHow do I check a wheel repair shop’s CNC lathe and powder coating oven?
- Expert answerHow do I check a machine shop’s spindle hours and machine service history?
- Expert answerWhat does a machine shop’s coolant maintenance routine say about shop care?
- Expert answerHow do I check a millwork shop’s CNC router bits and sharpening routine?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 02Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.