How do I check a millwork shop’s CNC router bits and sharpening routine?
Look at the bits themselves: sharp edges, clean flutes and sensible storage. Ask how often bits are sharpened, who does it and how the shop tracks wear. A test cut helps show whether the routine works, though spindle wear and feeds and speeds also affect the result. Tooling spending as a monthly total shows what it costs.
Bits are small, but dull ones cost a millwork shop in burnt edges, tear-out and slow feeds. Begin with the tool room. Look at how bits are stored, whether they are labelled by type and size, and whether sharp and dull bits are kept apart. A bin of mixed bits suggests the sharpening routine is loose.
Next, ask about the sharpening routine. Is it done in the shop or sent out? How often? Who decides when a bit is done? Ask for a record of sharpening dates and bits scrapped. Review any agreement with an outside sharpening service, listing the renewal date for your lawyer. Ask the seller to run a test piece and look at the edge. Burn marks, fuzzy grain or chipped edges point to dull tooling or poor feeds and speeds.
Ask for tooling purchases and sharpening costs as totals by month, next to the volume of work. Your accountant can help you read them. Finally, ask for the CNC router’s service history, since spindle and collet wear also affect cut quality. Photograph the tool room and the bit storage, and note the date of your visit.
Key takeaways
- Inspect how bits are stored and whether sharp and dull ones are separated.
- Ask for sharpening records and who decides when a bit is retired.
- Judge a test cut and compare tooling costs as totals with the volume of work.
Related reading
12 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I check a woodworking shop’s CNC router and nesting software?
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerWhat should I ask about a sign shop’s CNC router and cutting table?
- Expert answerWhat should I look for in a woodworking shop’s CNC router maintenance history?
- GuideBuying a cabinetry and millwork shop in Canada
- Expert answerHow do I check a millwork shop’s edgebander and panel saw condition?
Due diligence
- GuideCabinetry and millwork shop due diligence
- Expert answerHow do I check a millwork shop’s drying kiln or storage for lumber?
- Expert answerHow do I check a millwork shop’s hardwood supplier and stock quality?
- Expert answerHow do I check a millwork shop’s relationships with general contractors and designers?
- Expert answerHow do I find out how a millwork shop handles remakes and installation callbacks?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.