How do I check a woodworking shop’s CNC router and nesting software?
Have the shop cut a real sheet job while you watch, then look at how well the nesting software uses material. Ask about the router’s condition, the spindle, the vacuum table and the software licence. Confirm that more than one person can prepare and run a job.
Watch a real sheet from file to finished parts. Note how long the programming takes, how tight the nesting looks and how much offcut is left. Poor nesting wastes sheet goods quietly. Ask the operator how often they rework a layout by hand, and whether the software suggests it or a person decides.
Inspect the machine itself. Check the spindle, the tool changer, the vacuum table seal, the rails and the dust shoe. Look at the finish of cut edges, which reveals dull tooling and loose parts. Ask for service records, spare parts on hand and the history of any crash.
Then look at the software and the people. Who holds the licence, and can it transfer to a new owner? Ask your lawyer and the software vendor. Where are the files and tool libraries stored and backed up? Can a second person run a job when the lead programmer is away? A router that only one employee understands is a staffing risk, not just an equipment question. Ask how the shop quotes sheet jobs, and whether the quote relies on the nesting result or on a rule of thumb that the software may not match. Compare a few quotes with the real yield.
Key takeaways
- Watch a sheet go from file to finished parts.
- Judge the nesting by the offcut left behind.
- Inspect the spindle, vacuum table and cut-edge finish.
- Ask whether the software licence can pass to a new owner.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge a cabinet shop’s CNC router and edgebander condition?
- Expert answerHow do I assess the wide-format printers and routers in a sign shop?
- Expert answerHow do I check a cabinet shop’s design software licences and drawing files?
- Expert answerHow do I judge the condition of a machine shop’s CNC spindles before buying?
- Expert answerWhat does an old CNC mill’s maintenance log tell me about a machine shop?
- Expert answerWhat is owning a CNC machine shop like day to day?
- GuideBuying a custom software development shop in Canada
- Expert answerWhat should I look for in a woodworking shop’s CNC router maintenance history?
Due diligence
- GuideCustom software development shop due diligence
- Expert answerHow can I tell if a repair garage’s shop software data is complete and usable?
- Expert answerHow do I check a laser bureau’s nesting software and sheet utilization habits?
- Expert answerHow do I check a millwork shop’s CNC router bits and sharpening routine?
Selling
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.