How do I check scrap and unusable parts volumes at a refurbished electronics shop?
Ask how the shop records devices and parts that fail testing or cannot be repaired. Look at the scrap log by month, the reason for each entry and what the shop recovered. Rising scrap can point to weak buying or testing upstream, not just bad luck.
Begin with the physical space. Where does scrap sit before it leaves? Walk the area with the seller and look at what has built up. A large pile that has stayed for a long time suggests that nobody has a routine for clearing it, and may mean the books have not yet recognised the loss.
Then ask for the records. Is each scrapped item logged with a reason, a source and a date? Group the entries by cause: failed test, damaged in handling, wrong part, parts-only lot. If one cause dominates, trace where it starts. A high share from one buying route tells you about that route.
Ask how scrap is dealt with and whether any income comes from it, such as selling for parts or materials. Ask your accountant to show that income and the disposal costs separately, and how scrap is reflected in the margin. Ask for any written agreement with whoever collects it, and have your lawyer review it. Compare scrap against units processed, as totals, over several years. Ask finally who decides when something is scrap and when it becomes a parts donor, because that choice changes both the scrap figure and the cost of repairs. A written rule makes the numbers easier to trust.
Key takeaways
- Walk the scrap area and note what has built up.
- Group scrap log entries by reason, source and month.
- Ask what income and costs come from disposal.
- Compare scrap with units processed across several years.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow can I tell if a phone shop’s refurbished phones are properly tested?
- Expert answerHow can I check a printer service company’s parts return and refurbished-machine process?
- Expert answerHow do I check what a muffler shop earns from scrap metal and old parts?
- Expert answerHow do I find out what share of an electronics repair shop’s work comes from retailer referrals?
- Expert answerWhat should I ask about a tackle shop’s boat motor and electronics side line?
- Expert answerHow can I tell if a machine shop’s scrap and rework rate is under control?
- Expert answerHow do I evaluate a woodworking shop’s offcut and scrap handling costs?
- Expert answerHow do I check how a hobby store photographs and lists kits with many parts?
- Expert answerHow do I check an electronics assembly shop’s component stock for obsolete or slow-moving parts?
Selling
Buying
- Expert answerHow should I assess a home electronics repair shop’s old stock of salvaged panels and boards?
- Expert answerWhat should I look for in a home electronics repair shop’s board-level repair equipment?
- Expert answerIs a stamping shop’s scrap metal revenue a sign of efficiency or of waste?
- Expert answerHow do I inspect the pick-and-place machine and reflow oven in a circuit-board assembly shop?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.