How do I evaluate a woodworking shop’s offcut and scrap handling costs?
Find out how much material is bought against how much ends up in finished goods, and what the shop does with the rest. Then check what disposal costs and whether offcuts are reused or sold. Waste that is hidden in the books can distort the margin.
Start with yield. Compare the lumber and sheet goods bought over a period with the product sold. Ask the owner how much waste is normal for each product and how they know. A shop with cutting plans and nesting software may have better numbers than one that works by eye. Next, look at what happens to the waste. Is it hauled away, burned for heat, sold, given away or reused in small items? Ask for hauling invoices and see whether the cost is steady. Sawdust and shavings may be a cost or an income, depending on the arrangement. Then check how the costs show in the books. Ask your accountant whether waste sits in the cost of goods or is spread elsewhere, and whether the margin on each product reflects it.
Ask about trends. Has the shop changed products, machines or suppliers in a way that raised or lowered waste? Offcut-based products can add income, but ask how much time they take. Finally, look at storage. A pile of offcuts the owner means to use someday is a cost too. Ask also whether the shop could cut waste by changing its stock sizes, and whether the owner has tried it before.
Key takeaways
- Compare material bought with finished product sold.
- Ask for disposal invoices and what happens to dust and offcuts.
- Ask your accountant where waste shows up in the margin.
Related reading
15 pages on the same subject, grouped by topic.
Due diligence
- Expert answerHow can I tell if a machine shop’s scrap and rework rate is under control?
- Expert answerWhat should I look at in a furniture store’s returns and warranty claims handling?
- Expert answerHow do I check a deck builder’s lumber waste and offcut handling?
- Expert answerHow do I check a dessert shop’s food allergy handling and signage?
- Expert answerHow do I check the paint mixing system and waste handling at a body shop?
- Expert answerHow do I check scrap and unusable parts volumes at a refurbished electronics shop?
Selling
Buying
- Expert answerHow do I evaluate a bike shop’s relationships with local cycling clubs?
- Expert answerHow do I evaluate a dessert shop’s loyal wholesale accounts with cafés?
- Expert answerHow do I evaluate a gourmet shop’s in-store tasting events and their sales effect?
- Expert answerWhat should I ask about a machine shop’s coolant handling and chip disposal routine?
- Expert answerHow do I check a plastics plant’s regrind and scrap handling practice?
- Expert answerWhat do dust collection and offcut disposal cost a foam fabricator each month?
- Expert answerHow do flexo plates and anilox rolls affect a label shop’s running costs?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentWhat is the cost of goods sold (COGS)
- 02Business Development Bank of CanadaGovernmentWhat are variable costs?
- 03Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.