How do I check a tile drainage contractor’s plows and trenchers for wear?
Inspect the plow’s shank, boot and wear plates, the trencher’s chain, teeth and sprockets, and the hydraulics and tracks on both. Ask for hours and repair history for each machine, and have a mechanic you choose compare what you see with the paperwork.
Wear on this equipment is mostly ground contact. For a plow, look at the shank, the boot, the cutting edge and the mounting points for cracks or repairs. For a trencher, check chain stretch, tooth condition, sprocket wear and any bent or welded links. Ask what has been replaced and how often, since frequent replacement of the same part may point to rocky soil or a setup issue.
Check the rest of the machine as well. Hydraulic hoses, cylinders, pumps and leaks matter, and so do tracks, rollers and undercarriage. Start the machine and run its main functions through full travel. Listen for noise and watch for slow or jerky movement. Ask for hour meter readings and compare them with maintenance logs.
Think about conditions. Soil type and stones change how fast the parts wear, so ask what kind of ground the crew mostly works in. Your accountant can read wear parts spending across several years to show a pattern. In the written agreement, confirm which plows, trenchers and spare parts are included, and have your lawyer review the wording. Take photographs of worn edges and chains with a ruler in the frame, so you can compare them later with what a mechanic reports and what the seller said.
Key takeaways
- Inspect cutting edges, chains, teeth, hydraulics and tracks on every machine.
- Ask what parts are replaced often, and what ground the crew mostly works in.
- Compare hour meters with maintenance logs and use your own mechanic.
Related reading
13 pages on the same subject, grouped by topic.
Buying
Due diligence
- Expert answerCan a snow removal company count on its seasonal plow drivers?
- Expert answerHow do I check an excavation company’s drainage and weeping tile installation record?
- Expert answerHow can I judge the wear on a wedding venue’s chairs, tables and linens?
- Expert answerHow do I check a custom apparel shop’s school and club spirit-wear customers?
- Expert answerHow do I check an event rental company’s storage warehouse for wear or pests?
- Expert answerHow do I check the garment inventory and wear cycle at a uniform rental company?
- Expert answerHow do I check the pin deck and ball return noises that signal wear in a bowling alley?
- Expert answerHow do I check a team-building company’s outdoor equipment storage and wear?
- Expert answerHow do I check a tent rental company’s trucks and trailers for wear?
- Expert answerHow do I check a nursery’s shade structures and hoop houses for wear?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
- 03Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.