How do I check a nursery’s shade structures and hoop houses for wear?
Walk every structure and look at frames, anchors, fasteners, covers and doors, noting rust, sagging, tears and repairs. Ask for the age of each cover and frame, plus what has been replaced, and have a builder or a qualified tradesperson estimate the work still ahead.
Ask for a list of every structure with its type, age and what has been replaced. Then walk them all, not just the ones near the entrance. Look along the frames for rust, bent tubing and loose fasteners. Check the anchors at the base and the way the structure sits on the ground. Sagging in the roof line or lean in the posts suggests stress.
Check the covers closely. Look for tears, thin spots, patches and brittle sections, and see how well they are fastened. Ask how often covers are replaced and how the crew handles the work. Inspect doors, vents, side walls and any shade cloth, and ask what the structures went through in the last hard weather and how they held.
Ask the seller for a list of repairs they expect to make soon, then ask a qualified tradesperson to add rough costs. Use the list in your price discussion with your accountant. List each structure and have your lawyer review the paperwork behind them. Ask which structures are central to the work and which are spare, since a worn frame in a key spot matters far more than one in a corner.
Key takeaways
- List each structure with its age and what has been replaced.
- Inspect frames, anchors and covers on every structure, not only the nearest.
- Ask a qualified tradesperson to price the work still ahead.
- Rank structures by how much the operation depends on each.
Related reading
12 pages on the same subject, grouped by topic.
Due diligence
- Expert answerWhat should I check about a nursery’s overwintering structures and cold damage history?
- Expert answerHow do I check a rental yard’s stock of wear parts for quick turnarounds?
- Expert answerHow do I check a tile drainage contractor’s plows and trenchers for wear?
- Expert answerHow do I judge wear on a grain site’s bucket leg, augers and conveyors?
- Expert answerHow do I judge a shade sail installer’s mounting hardware inventory?
- Expert answerWhat should I ask about a workroom’s blind and shade hardware suppliers?
Buying
- Expert answerShould a formal wear shop own its rental tuxedos or use a wholesale rental supplier?
- Expert answerWhat should I ask a nursery about its garden centre walk-in customers versus wholesale?
- Expert answerHow can I tell if a mattress store’s salespeople depend on commission structures that may change?
- Expert answerHow do I check the age and safety of a family fun centre’s rides and play structures?
- Expert answerHow do I judge a shade installer’s sewing room and fabrication equipment?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.