Deavo
Due diligenceExpert answer · 1 min read

How do I judge wear on a grain site’s bucket leg, augers and conveyors?

Check the bucket leg’s belt, buckets, bearings and head and boot sections; inspect auger flighting and housings for thinning; and look at conveyor belts, rollers and drives. Ask for repair history on each piece and have a mechanic you choose confirm what you see.

Start with the bucket leg, since a failure there can stop the whole site. Look at belt condition and alignment, missing or damaged buckets, bearing noise and signs of grain leaking at the boot. Ask when the belt and buckets were last replaced, and whether the leg has been shortened, lengthened or repaired.

Augers wear from the inside. Flighting thins with use, and housings can hold hidden damage. Look for bare patches, bent sections, noisy drives and patched casings. Ask how many hours each auger runs in a season and what has been replaced. For conveyors, look at belt edges, rollers, tracking and drive guards, and listen to them under load.

Put the findings on a list by machine. For each one, record what condition it is in, what repair is likely and when. Your accountant can fold those into a spending plan. Ask the seller for maintenance records, and have your own technician look at anything that worries you. Confirm in the written agreement which items are included and in what condition. Photograph worn spots with a tape beside them, so that whoever reads your notes later can see how bad the wear looked on the day.

Key takeaways

  • Inspect the bucket leg first; a failure there can stop the whole site.
  • Check flighting, housings, belts and rollers, and listen under load.
  • Keep a list by machine of condition and likely repair, and review it with your accountant.

Sources

This answer is checked against primary sources. Links were last confirmed on the dates shown.

  1. 01
    Business Development Bank of CanadaGovernment
    How to conduct due diligence when buying a business
    bdc.ca·Checked Oct 21, 2026
  2. 02
    Business Development Bank of CanadaGovernment
    What are the steps to buying a business?
    bdc.ca·Checked Oct 21, 2026
  3. 03
    Business Development Bank of CanadaGovernment
    Equipment valuation: How to do it
    bdc.ca·Checked Oct 24, 2026

Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.