How do I check an excavator’s undercarriage hours and bucket wear before buying a business?
Ask for each excavator’s hour-meter reading and service history, then have the machine inspected on site. Look at track links, rollers, sprockets and idlers for uneven wear, and check the bucket teeth, edge and pins. Hours alone tell you little; how the machine was used and maintained matters more.
Start with paper. Ask the seller for the serial number, the hour-meter reading, purchase records and any rebuild invoices for each excavator. Compare the hours on the meter with what the service records and fuel purchases suggest. A meter that does not fit the story calls for a direct question.
Then see the machine working. Walk the tracks and look for loose or sagging chain, flattened sprocket teeth, leaking rollers and cracked track shoes. Undercarriage is among the costliest parts to replace, so uneven wear on one side is worth recording. On the bucket, check the cutting edge, the teeth, the adapters and the pins and bushings for slop. Ask who has operated the machine and in what ground, because rock and abrasive soil wear parts faster than clay or loam.
Bring in an independent mechanic or an equipment appraiser to inspect and report in writing. Their findings give you something concrete to raise in negotiation and in your purchase agreement, and they help you decide how much replacement spending to plan for in the first year. Photograph everything you inspect, with dates, so the report and your notes match later.
Key takeaways
- Get the serial number, hour reading and service records for every excavator before you visit.
- Inspect tracks, rollers, sprockets, teeth and pins yourself, then hire an independent inspector.
- Ask what ground the machine worked in and who ran it.
Related reading
15 pages on the same subject, grouped by topic.
Buying
- Expert answerHow do I judge the condition of a tree service’s chippers and bucket trucks?
- Expert answerWhat should I look at in a holiday lighting company’s bucket truck and ladder fleet?
- Expert answerWhich chimney sweep tools and liners in the van wear out fastest?
- Expert answerDo prom and graduation seasons make a formal wear shop too lumpy to run?
- Expert answerHow do I check the dual-control brake wear on a driving school’s training cars?
- Expert answerHow do I check wear and tear on a children’s indoor play centre’s equipment?
- Expert answerHow do I judge a pizzeria’s dough mixer and deck oven wear?
- Expert answerHow do I check the arm and wheel wear on a batting cage’s pitching machines?
Due diligence
- Expert answerHow do I find out if a sign shop relies on one installer with a bucket truck?
- Expert answerHow do I check a locksmith’s after-hours dispatch arrangement is sustainable?
- Expert answerWhat should I check in a plumbing company’s emergency after-hours call arrangement?
- Expert answerWhat should I look for in a fabrication shop’s quote history versus actual job hours?
- Expert answerWhat should I look for in a rustproofing shop’s undercarriage inspection photos?
- Expert answerHow do I check how rustproofing technicians learn undercarriage prep?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
- 03Business Development Bank of CanadaGovernmentWhat are the steps to buying a business?
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.