How do I check the arm and wheel wear on a batting cage’s pitching machines?
With the machines off and locked out, inspect the wheels, arms, belts, bolts and mounts for flat spots, cracks, play and looseness. Then watch each machine pitch and look for balls that vary in speed or direction. Ask for service records and the supplier’s name.
Pitching machines wear in ways a quick glance can miss. Ask the seller to switch off and secure each machine, then inspect it up close. On wheel machines, look at the wheels for flat spots, glazing, cracks or uneven grooves, and where a machine has more than one wheel, check that the wheels match. On arm machines, look at the arm itself, its pivot, the springs or bands, and the cup that holds the ball. Check bolts, mounts, belts and cables for looseness, rust or frayed spots.
Next, watch the machines work. Stand at a safe place and observe a series of pitches. Do the balls arrive consistently, or do they wander, wobble or change speed? Does the machine make grinding or rattling sounds? Ask staff how often customers complain about a lane and whether any machine is kept out of service on busy nights.
Ask about service. Who repairs the machines, how often, and are there invoices for wheels, belts or motors? Where do the parts come from and how long do they take? Check the age of each unit and whether replacements are still available. A technician who knows this kind of equipment can give a second opinion, and your accountant can help you plan for replacing a machine.
Key takeaways
- Inspect each machine closely while it is switched off and secured.
- Watch a series of pitches for consistency in speed and direction.
- Ask for service invoices and a supplier name for parts.
Related reading
14 pages on the same subject, grouped by topic.
Buying
- Expert answerShould I buy a batting cage business or start one?
- Expert answerHow do I check a tire shop’s wheel balancer and mounting machine condition?
- Expert answerHow do I find out how often a wheel repair shop redoes failed refinishing?
- Expert answerHow do I judge a wheel repair shop’s refinishing and colour matching skill?
- Expert answerWhat should I check about a wheel repair shop’s chrome and polished wheel work?
- Expert answerWhich tire shops and dealers refer work to a wheel repair shop, and how do I verify it?
- Expert answerDo prom and graduation seasons make a formal wear shop too lumpy to run?
- Expert answerHow do I check the dual-control brake wear on a driving school’s training cars?
- Expert answerHow do I check an excavator’s undercarriage hours and bucket wear before buying a business?
- Expert answerHow do I check the tire wear and brake pads on a bicycle rental fleet?
- Expert answerHow do I check wear and tear on a children’s indoor play centre’s equipment?
- Expert answerWhat should I ask about foaming brush and spray arm replacement at a self-serve wash?
Sources
This answer is checked against primary sources. Links were last confirmed on the dates shown.
- 01Business Development Bank of CanadaGovernmentHow to conduct due diligence when buying a business
- 02Business Development Bank of CanadaGovernmentEquipment valuation: How to do it
Deavo is an advertising and listings platform, not a brokerage, law firm or valuation firm. This page is general information, not legal, tax, accounting or valuation advice, and rules differ by province. Confirm anything you rely on with a qualified professional before you act on it.